Injection Molding Silicone Rubber for Resin Jewelry Casting
- Payment Type:
- L/C, T/T
- Incoterm:
- FOB, CIF
- Min. Order:
- 100 Kilogram
- Min. Order:
- 100 Kilogram
- Delivery Time:
- 20 Days
- Transportation:
- Ocean, Land, Air
- Port:
- Shenzhen
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | China |
|---|---|
| Supply Ability: | 8t per day |
| Payment Type: | L/C,T/T |
| Incoterm: | FOB,CIF |
| Certificate: | FDA,SGS,MSDS,RoHS,ISO |
| Transportation: | Ocean,Land,Air |
| Port: | Shenzhen |
Injection molding silicone rubber for resin jewelry casting Application:
1. Silicone Medical products
2. Silicone Food grade products
3. Silicone Baby product
4. Silicone Household product
5. Crafts and Gift product
6. Silicone Industries in all areas
Injection molding silicone rubber for resin jewelry casting Feature:
Injection molding silicone rubber for resin jewelry casting is a two-component liquid silicone rubber for injection molding processes. HY-2130 shows a higher productivity, less yellowing and low volatile contents. HY-2130 would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
Injection molding silicone rubber for resin jewelry casting Advantage:
Relative low viscosity , not only can be pumped to mix, but also can be formed the continuous automation during the process of measurement, mixing, injection molding. as well as formed products with different complex shapes.
Curing speed can be finished within 20~30mins and the molding cycle time is less than 1min, which is good for saving costs, efforts and be high efficiency.
with low molding pressure, accurate measurement, high precision molds, products can be perfectly formed with no flash or defects, which helps to save cost on raw materials and post-working process.
The performance of finished products can be compared favorably to HTV silicone rubber, while the labor costs can be saved by half.
The vulcanizing system of this product is the same as other addition-cured silicone rubber, but there won`t be peroxide decomposition products which generated by HTV silicone cured. It is with high transparency, high tear strength, good elasticity, good weather-ability, and with resistance of high temperature, aging, as well as excellent resistance to yellowing.
Injection molding silicone rubber for resin jewelry casting Typical Physical Properties:
|
Product |
HY-2130 |
|
Appearance |
Translucent |
|
Hardness(shore A) |
25±2 |
|
Mix ratio(A:B) |
10:1 |
|
Viscocity Part A(mPa.s) |
60000±2000 |
|
Viscocity Part B(mPa.s) |
35000±500 |
|
Tensile strength (kgf/cm2) |
32±5 |
|
Tear-strength (kN/m) |
18±2 |
|
Elongation(%) |
500±50 |
|
Pot life/working time (mins) |
30-40 |
|
Curing time/setting time (hrs) |
3-4hrs(25°C) 110-20mins(60°C) |
|
Shrinkage rate (%) |
0.1 |
Related Keywords
