
addition silicon rubber liquid for concrete garden statues
Your message must be between 20 to 2000 characters
Contact NowBasic Specification
supply ability | 8 ton a day |
---|---|
application | Molds making silicone rubber for culture relics |
validity | 1 year |
type | addition |
appearance | liquid material |
Eco-Friendly | Yes |
Test Report | SGS |
Detail Description
addition silicon rubber liquid for concrete garden statues
APPLICATIONS of addition silicon rubber liquid for concrete garden statues :
E630 addition silicone rubber could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Datasheets of addition silicon rubber liquid for concrete garden statues
Model |
E630 |
Appearance |
Liquid |
Color |
Translucent |
Mixing ratio |
1:1 |
Operating time (mins ) |
30-50 |
Curing time(hours 25 0C) |
6-8 |
Hardness (A°) |
28±2 |
Density ( g/cm 3 ) |
1.13 |
Viscosity (Mpas -25 0C) |
9000±2000 |
Tensile-strength(kgf/cm2 ) |
≥60 |
Tear-strength (kgf /cm ) |
≥12 |
Elongation-break(%) |
≥ 400 |
Retractility(%) |
≤0.1 |
Shelf life (month) |
≥12 |
FEATURES of addition silicon rubber liquid for concrete garden statues:
Two-parts, flowable liquid silicon & curing agent.
Can solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
Good tensile strength and tear strength,low shrinkage.
It gets cured at room temperature 25 0C within 5-7 hours.
An exceptional fluidity and good operability, easy to be demolded.
Suitable for pouring methods of operation for small sized molds making.
OPERRATING INSTRUCTION of addition silicon rubber liquid for concrete garden statues:
1.Stir part A and part B with right mixing ratio
evenly. And get the mixture for vacuum-
pumping. (If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE of addition silicon rubber liquid for concrete garden statues:
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE of addition silicon rubber liquid for concrete garden statues:
Packed in clean 5kg/pail, 25kg/pail, 200kg/pail.
Additional Information
Payment Terms | L/C, T/T, Credit Card, Western Union |
---|---|
Minimum Order | 200kg |
Lead Time / Delivery Time | 5 Day(s) |
Sample Available | YES |
Delivery Details | within 3 days after getting payment |
FOB Port | Shenzhen |
Loading Info | by ship or air |
Packing Info | 25kg/drum and 200kg/drum |
Target Market(s) | North America, Oceania, Southeast Asia, Eastern Europe, Africa(except Middle East), Hong Kong/ Macao/ Taiwan, Latin America, Japan & Korea, Mainland China, Western & Southern Europe, Northern Europe, Central & Southern Asia, Middle East |
Related Keywords