Functions and applications
The USB HANDHELD MICROSCOPE is a new electronic product for the
micro object observation. It is a tubular imaging system consisting of an
optical lens, an image sensor, an illumination mechanism, and an image
transfer control circuit connected to a computer. You can display the images
captured by the USB HANDHELD MICROSCOPE on the computer screen,
store them on the computer, print them, or send them over the Internet.
Applications
As a USB microscope, it can magnify stamps, coins, antiques, insects,
electric circuits, machines, hair, skin, fabrics, food, decorations, etc. Before installation and use of this product, please read the instructions in
this manual to ensure its correct use.
Safety instructions
Before using this product, please carefully read the following safety
instructions.
1. The socket that the computer is plugged in must be properly grounded,
as the computer supplies power to this product. If in any doubt, please
have a professional electrician check and verify the grounding to ensure
safety.
2. Never use this product in stormy weather.
3. This product contains delicate and precision components. Be gentle
when using it and avoid harsh handling or excessive force that may
cause damage to the product.
4. The temperature of the handle increases slightly during use and it feels a
little warm. This is normal. If the product is overheated and hot to the
touch, immediately cut off the power and contact us for repair.
5. Never leave the product on unattended. Unplug from the USB port after
use.
6. Do not disassemble this product. Disassembling this product will result in
irreparable damage. The company is not responsible for damage
resulting from disassembly of the product by the user. In case of any
difficulties in using the product, please contact us.
7. This product may only be used by children under supervision of an adult.
Never give this product to a child to use or play by him or herself. Keep
this product out of reach of children.
8. Do not let this product come in direct contact with steam, vapor, water, or
liquids of any kind. Such contact can cause irreparable damage that is
not covered by warranty.
9. When not in use, put the handle in the transparent sleeve and store it in a
tightly sealed box to avoid moisture and decay. Damages resulting from
improper storage are not covered by the warranty.
10.The cable with this product has been strictly tested. To ensure safe use,
do not replace it.
System Requirements
For best picture quality, the following specifications are recommended:
1. Windows XP, Vista or MAC version 10.4.2 to 10.5.2
2. 128M RAM or above
3. At least one USB port (For best effect, USB 2.0 port is recommended).
4. CD-ROM and a 40G or higher hard disc.
Technical Specifications
1. DSP: Digital Image Monarch Processor.
2. Sensor: high-quality CMOS sensor,2.0MP
3. Resolution: 1600X1200
4. Interface: USB2.0.
5. Frame rate: Max 20 frames/sec (When Resolution: 640X480).
6. Magnification: 1X---200X
7. Size: 8.2mm in diameter, 110mm in length
8. USB cable length: 1.6 meters
Installation
To avoid mistakes in the installation process, please strictly follow these
steps:
Place the included CD into the CD-ROM drive.
Find the icon of ‘amcap.exe’.
Copy the ‘amcap.exe’ to your PC. Just copy but never try to install it.
Plug the HANDHELD MICROSCOPE into the USB port, and double click on
the icon of ‘amcap.exe’ to open the image window.
No video in the window. How do turn on?
Click Devicesý USB…..
Click OptionsýPreview
Or try using other USB ports.
please sel ect the usb device
Directions for Use
Properly connect the USB HANDHELD MICROSCOPE to the computer and
to rotate the dial on the USB cable to controls the brightness of the LED on
the USB HANDHELD MICROSCOPE. After a short while you should see
the image captured by the USB HANDHELD MICROSCOPE on the
computer monitor.
OPEN IMAGE WINDOW
Double click on the icon and open an image window on the screen. After a
few seconds the USB HANDHELD MICROSCOPE will begin to take images
in the window. Click on ‘OPTIONS’ and click on ‘VIDEO CAPTURE PIN’.
Choose one of image window size in the drop-down menu and click on ‘OK’
to confirm.
Focusing
TAKE PHOTOS
Push down the snap key on the handle or push
down the button of the dimmer that located on
the USB cable to freeze an image. Or click
‘snap’ on the top of image window, or push down
the ‘return key’ of keyboard to freeze an image.
The photos you have taken will be saved in the
computer and display an icon on the screen.
If your system could not freeze an image please
follow steps to make it work:
1, Open the image window
2, Click on ‘capture’ on top line of the window
3, Click on ‘still’ in the pull down window
3, Click on ‘folder’
4, Designate the folder for your photos location
5, Click right mouse button to confirm
The photos can be taken by push
down the button of the dimmer or just
push down the Enter key of the
keyboard.
LED Light Adjustment
There is a LED light dimmer on the
USB cable. Turning the dimmer can
adjust the light power to a proper level
according the demand of observation.
MOVIE RECORD
For making a record of still image please follow below procedures.
1, Click on the ‘capture’ that located on the top line of image window
2, Click on the ‘set time limit’ in the pull down window
3, Click on the ‘use time limit’
4, Input the number of seconds that you want to delay the record
5, Click right mouse button to confirm
6, Click ‘capture’ again
7, Click ‘start capture’
8, Click ‘ok’ to start the recorder
The movie record will be stopped while time is off.
The movie will be saved as the AVI format.
Related Keywords
