Liquid silicone rubber for manual mold

Get Latest Price

Min. Order:: 200

Min. Order:: 200

Delivery Time:: 3 Days

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Place of Origin:	China
Supply Ability:	8 Ton per Day
Certificate:	RoHS.MSDS.SGS

Product Description

Liquid silicone rubber for manual mold applications

Liquid silicone rubber for manual mold is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.

Liquid silicone rubber for manual mold features description

Liquid silicone rubber for manual mold features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers.

Liquid silicone rubber for manual mold operations

Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2-3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2-3 hours.

(Note: our company does not recommend you to add silicon oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demold.)

Frequently asked questions for Liquid silicone rubber for manual mold

What should we do when the air bubbles appeared in the process of mold making ?

To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to deair. If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%-2%. In this way, the pre-crosslinking time of silicon rubber will slow down, so the air in the mold will be eliminated gradually to reduce the air bubbles.

For get further information about our silicone product, PLS contact with Miss Cherry

TEL: 0086-755-89948294

Mobile: 0086-13410795929

FAX: 086-755-89948030

Email: cherryyu802 (at) hotmail (dot) com

hyjc(at)szrl(dot)net

Welcome to visit www (dot)szrl (dot)net .anytime .

Send your message to this supplier

* From:
* To:

Ms. cherry yu
* Messages:

Enter between 20 to 4,000 characters.