LED Linear Batten Light 20W with Emergency

What is LED Batten Light?

Batten light just as its name is a long and flat metal strip was embedded in a fluorescent tube, and then fixed on the ceiling. Traditional Led batten lights were T8 and T5 tubes. This kind of lighting with a short lifespan and consumes large power.

Led batten light is an LED product which was specially designed to replace the traditional fluorescent tubes.

Litehome LED Batten Light is an energy-saving, long working life led lighting developed for office/warehouse, which can improve the comfort, safety and productivity of employees, while reducing the operating costs of facility tenants and owners.

With proper lighting, staff will experience better visibility and higher concentration, thereby increasing their accuracy and work speed.

What functions of Litehome Batten light has?

Litehome LED Batten Light has following three different functions to meet your multi-needs.

1. 3-Hour Emergency

Litehome LED Batten Light with emergency function. There is a spare battery inside the light. This backup battery can be automatically charged when the led lighting is working normally. And it discharges when the power is off to provide power to the lamp. This can ensure that the lamp stays on during a power outage.

It is an ordinary led lighting when power on, and when the power is off, it is an emergency light. It can continue to illuminate for 3 more hours when the power is off, this function allows people to safely evacuate the building and avoid the occurrence of stampede.

2. Motion Sensor
The application of sensors makes led lighting smarter. LED Sensor batten lights are aim to detect the human body motion response. When people enters its sensing area, it will automatically turn on the light, and when people leaves, it will turn off by itself.Its function is very powerful. It can adjust the light value, waiting time, delay time, preset brightness, detection range and remote control distance.
With the motion sensor function, LED light is more convenient and energy-saving.

Generally speaking, the sensor will go dark after the time manufaturer designed. Generally this time is 60s. But LiteHome's LED Sensor batten lights can keep the time stay for 5s/30s/1min/3min/5min/10min/30min, or you can turn off the motion sensor function(This can be achieved only with the use of a remote control)

Litehome LED Sensor batten lights use LED chips without harmful substances in long-term use. It is equipped with microwave induction, and the following values can be set through the matching remote control:
1. You can set the light value. If the value of the ambient light meets the light value you set, it will not turn on even if there is a moving signal. When the ambient light does not meet the set value, the light will turn on.
2. The waiting time can be set. That is, how long the light stays low luminous after the person walks.
3. Set the delay time, that is, how long the light stays in the fully lit state after the person has left.
4. Set the preset brightness: you can set the full brightness and low brightness.
5. Set the detection range.
6. Remote control distance: You can set the distance range of the remote control sensor.

The following effects can be achieved through these settings:
1.When the ambient light is sufficient, the Led Batten Sensor will not turn on even if there is a moving signal. When the ambient light is insufficient, the sensor detects the movement signal and the light will be turned on. After the delay time, if no movement signal is detected, the light will turn off.
2. When no movement signal is detected, the light stays low-light level. When the sensor detects the movement signal, the lights turn on The original brightness. After the delay time, if no movement signal is detected, the light will be adjusted to low brightness.
3. When the ambient light is sufficient, the Led Batten with Sensor will not turn on even if there is a moving signal. When the ambient light is insufficient, the sensor detects the movement signal and the light will be turned on. After the delay time, if no movement signal is detected, the light will be adjusted to a set low brightness. After the waiting time, if no movement is detected in the detection area, the light is automatically turned off.
Therefore,  Litehome LED Batten Light with sensor is very suitable for warehouses and parking lots.

Why choose Litehome LED Batten Light?
1.Lamp beads, the more lamp beads with the same wattage, the lower the breakage rate. Of course the quality of the lamp beads are very important as well, Litehome batten light use SMD2835 LED chips make sure the high quality of lighting fixture. 
2. Power supply. The power supply includes isolated power supply and non-isolated power supply. Isolated power supply is safer. The conversion rate of the power supply also determines the energy-saving effect of this lamp. Litehome use isolated power supply  which is safe and durable.
3. Aluminum profile. Aluminum profile determines the effect of heat dissipation. As we all know, the higher the power of the LED, the higher the temperature, which will also affect the service life of the lamp. The better the aluminum profile, the better the heat dissipation effect. LiteHome batten light use AL 6063 T5 as raw material which is full of the whole lamp base, excellent heat dissipation performanc and long lifespan. 
4. Changeable. Litehome LED Batten lights adopt a replaceable light source design, which is very simple to install and disassemble. Their parts can be easily replaced directly without rewiring.

5.Linkable design makes the lamps connect each other from end to end. And the connection in series can reduce the cost of light wiring.
6.Installation and maintenance are more convenient. There is a buckle design, which can easily open the lamp body.

7.With a 5-year warranty.
8.The lamp has only 10% decay after it works for 50000 hours.