Groove Photoelectric Sensor FF-UX401
-
$7.00≥1 Piece/Pieces
- Min. Order:
- 1 Piece/Pieces
- Min. Order:
- 1 Piece/Pieces
Your message must be between 20 to 2000 characters
Contact Now| Payment Type: | T/T,L/C |
|---|
Photoelectric Sensor FF-UX401
- Photoelectric sensors can also be divided into basic and combination type two categories. The basic photoelectric sensor switch converts basic physical quantities such as light, magnetism, temperature, pressure, gas and humidity into electricity; while the combined photoelectric sensor is used to check other physical quantities by applying the basic photoelectric sensor. General combination type photoelectric switch are required to secondary conversion or several basic conversion devices for combination to measure a physical quantity.
-
At present, the main products are: safety light curtain, photoelectric switch series, proximity switch series, optical fiber sensor series, ultrasonic sensor, intelligent sensor, displacement sensor, gas pressure sensor, etc. Look forward to your cooperation!
|
Sensing Method |
Through-beam type(Groove type) |
Reflected type |
|||
|
Model |
FF-UX301 |
FF-UX401 |
FF-UY301 |
FF-UY401 |
|
|
FF-UY302 |
FF-UY402 |
||||
|
Sensing Distance |
3.6mm(Groove width) |
5mm(Reflectance 90% 15×15mm White paper) |
|||
|
Standard Sensing Object |
Opaque objects: 1×0.5mm min |
- |
|||
|
Differential Travel |
0.05mm max |
0.2mm(Sensing Distance3mm, Horizontal) max |
|||
|
Light Source (Luminous Wavelength) |
GaAs Infrared Emitting Diode(940nm) |
||||
|
Indicator Light |
Light up When light is received(Red ) |
||||
|
Power Supply Voltage |
DC5 to 24V±10% Ripple (p-p) 5% max |
||||
|
Current Consumption |
Average value: 15mA Maximum value: 50mA max |
||||
|
Control Output |
NPN Voltage output: Load power supply voltageDC5 to 24V; Load current80mA max |
||||
|
OFF Current0.5mA max |
|||||
|
Residual voltage: 2.0V max(When Load current is 80mA) |
|||||
|
Residual voltage: 1.0V max(When Load current is 10mA) |
|||||
|
Response Frequency |
500Hz min |
||||
|
Ambient Illumination |
On the surface of the receiver Incandescent light and Sunlight: 3000lx max |
||||
|
Ambient Temperature |
Operating: -10 to +55℃; Storage: -25 to +65℃(With no icing) |
||||
|
Ambient Humidity |
Operating: 5 to 85%RH; Storage: 5 to 95%RH(With no condensation) |
||||
|
Vibration |
Durable |
10-55Hz 1.5-mm up and down amplitude for 2h each in X, Y, and Z directions |
|||
|
Shock |
Durable |
500m/s² for 3 times each in X, Y, and Z directions |
|||
|
Protective Structure |
IP50 IEC Specification |
||||
|
Connecting Method |
Plug-in type (Non-solderable) |
||||
|
Quality |
Approx: 2.6g |
||||
|
Material |
Case |
Polycarbonate (PC) |
|||
Related Keywords
