Groove Photoelectric Sensor SM-L45/L45P
-
$5.00≥1 Piece/Pieces
- Min. Order:
- 1 Piece/Pieces
- Min. Order:
- 1 Piece/Pieces
Your message must be between 20 to 2000 characters
Contact Now| Payment Type: | T/T,L/C |
|---|
Photoelectric Sensor SM-L45/L45P (L-Type Photoelectric Sensors & Lead-Out Photoelectric Sensor Groove)
- Groove photoelectric sensors are characterised by their alignment-free, simple installation and high sensitivity, and can be used to detect small parts or labels, or even printed marks on transparent films.
- At present, the main products are: safety light curtain, photoelectric switch series, proximity switch series, optical fiber sensor series, ultrasonic sensor, intelligent sensor, displacement sensor, gas pressure sensor, etc. Look forward to your cooperation!
|
Sensing Method |
Through-beam type |
||
|
Sensing Distance |
5mm(Groove width) |
||
|
Minimum Sensing |
1.2×0.8mm Opaque objects |
||
|
Differential Travel |
0.05mm max |
||
|
Repeated Accuracy |
0.01mm max |
||
|
Light-Emitting Element |
Infrared LED(Peak wavelength of projected light: 855nm; Non-modulated) |
||
|
Power Supply Voltage |
5 to 24V DC±10% Pulse (P-P)10% max |
||
|
Current Consumption |
15mA max |
||
|
Control Output |
Output Type |
<NPN Output Type> NPN Open collector transistor |
<PNP Output Type> PNP Open collector transistor |
|
Maximum inflow current: 50mA |
Maximum inflow current: 50mA |
||
|
External voltage: 30V DC max(Between output and 0V) |
External voltage: 30V DC max(Between output and +V) |
||
|
Residual voltage: 2V max(When Inflow current is 50mA) |
Residual voltage: 2V max(When Inflow current is 50mA) |
||
|
1V max(When Inflow current is 16mA) |
1V max(When Inflow current is 16mA) |
||
|
Output Action |
Light-ON/Dark-ON Equipped with 2 types of output |
||
|
Action Indication |
Red LED(Light up When light is received) |
||
|
Response Time |
Light-ON: 20μs max; Dark-ON: 80μs max |
||
|
Response Frequency |
1kHz min(Maximum value is 3kHz) |
||
|
Environmental Performance |
Ambient Illumination |
On the surface of the receiver Fluorescent lamp: 1000lx max |
|
|
Ambient Humidity |
Operating: 5 to 85%RH; Storage: 5 to 95%RH(With no icing or condensation) |
||
|
Ambient Temperature |
Operating: -25 to +55℃(Be careful not to condense or freeze); Storage: -30 to +80℃ |
||
|
Vibration Resistant |
Frequency 10 to 2000Hz 1.5-mm dual amplitude for 2h each in X, Y, and Z directions |
||
|
Shock Resistance |
Acceleration 15000m/s²(Approx 1500G) for 3 times each in X, Y, and Z directions |
||
|
Short-circuit protection |
Equipped |
||
|
Protective Structure |
IP65 IEC60529 Specification |
||
|
Material |
Case: Polybutylene Terephthalate(PBT); Slit light transmission cover(Light casting and light receiving sections): Polycarbonate |
||
|
Cable |
Diameter 0.09mm*4 cores Bending-resistant, oil-resistant, heat-resistant rubber cable(Maximum length 3m) |
||
|
Connecting Method |
Lead-out type (standard Cable length 1m) |
||
|
Weight |
Body weight: Approx 15g |
||
Related Keywords
