Groove Photoelectric Sensor FF-U676-1/U676P-1
-
$4.00≥1 Piece/Pieces
- Min. Order:
- 1 Piece/Pieces
- Min. Order:
- 1 Piece/Pieces
Your message must be between 20 to 2000 characters
Contact Now| Payment Type: | T/T,L/C |
|---|
Photoelectric Sensor FF-U676-1/U676P-1 (Through-Beam Photoelectric Sensor Switch & Groove Lead-Out Photoelectric Sensors)
- Photoelectric Sensor: The photoelectric sensor is a member of the sensor family, which converts the change in light intensity between the transmitter and receiver into a change in current for the purpose of detection. As the output and input circuits are electrically isolated (i.e. electrically marginal), photoelectric switches can be used in many applications.
- At present, the main products are: safety light curtain, photoelectric switch series, proximity switch series, optical fiber sensor series, ultrasonic sensor, intelligent sensor, displacement sensor, gas pressure sensor, etc. Look forward to your cooperation!
|
Sensing Method |
Through-beam type |
|
|
Sensing Distance |
5mm(Groove width) |
|
|
Standard Sensing Object |
Opaque objects above 2×0.8mm |
|
|
Differential Travel |
0.025mm max |
|
|
Light Source (Luminous Wavelength) |
GaAsInfrared Emitting Diode(940nm) |
|
|
Indicator Light |
Lights up when light is received(Red)(Type A and Type R light up when shading) |
|
|
Power Supply Voltage |
DC5 to 24V±10% Ripple(p-p) max |
|
|
Current Consumption |
35mA max(NPN Type); 30mA max |
|
|
Control Output |
NPN Type: NPN Open connector Output DC5 to 24V 100mA max |
|
|
Residual voltage0.8V max(When load current 100mA); Residual voltage0.4V max(When Load current 40mA); OFF Current(Leakage current)0.5mA max |
||
|
PNP Type: PNP Open connector Output DC5 to 24V 50mA max |
||
|
Residual voltage1.3V max(When load current 50mA); OFF Current(Leakage current)0.5mA max |
||
|
Response Frequency |
1kHz min(The average value is 3kHz) |
|
|
Ambient Illumination |
On the surface of the receiver Fluorescent lamp: 1000lx |
|
|
Ambient Temperature |
Operating: -25 to +55℃; Storage: -30 to +80℃(With no icing or condensation) |
|
|
Ambient Humidity |
Operating: 5 to 85%RH; Storage: 5 to 95%RH(With no icing or condensation) |
|
|
Vibration |
Durable |
20 to 2000Hz(Maximum acceleration 100m/s²) 1.5-mm up and down amplitude for 2h (4-mm periods) each in X, Y, and Z directions |
|
Shock |
Durable |
500m/s² for 3 times each in X, Y, and Z directions |
|
Protective Structure |
IP50 IEC60529 Specification(Plug-in type); IP67 IEC60529 Specification(Plug-in relay type) |
|
|
Connecting Method |
Plug-in type(Direct solderable); Lead-out type (standard Cable length 1m); Plug-in relay type(standard Cable length 0.1m) |
|
|
Material |
Case |
Polybutylene Terephthalate(PBT) |
|
Cover Light Casting Section/Light Receiving Section |
Polycarbonate |
|
Related Keywords
