Left and Right Joy Con for Switch Console
-
$19.9050-499 Piece/Pieces
-
$18.90500-999 Piece/Pieces
-
$16.50≥1000 Piece/Pieces
- Transportation:
- Ocean, Land, Air
- Port:
- Shenzhen
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
| Place of Origin: | Shenzhen |
|---|---|
| Productivity: | 5000pcs each day |
| Supply Ability: | 5000pcs each day |
| Payment Type: | L/C,T/T,Paypal |
| Incoterm: | FOB,CIF,EXW |
| Certificate: | ISO9001 |
| Transportation: | Ocean,Land,Air |
| Port: | Shenzhen |
Product Description
Product Description
Nintendo Switch Joy-Con Product Paramenters
|
1. Introduction for Nintendo Switch Joy-Con
1) this handle is a wireless left and right small handle, which is compatible with the switch console and supports plug and play with the host in direct plug-in mode.
2) this handle can be used as an integral handle, and the left handle and the right
handle can also be used as two independent handles.
3) support automatic pairing with host plug and play, no need to set, simple and convenient.
4) wireless connection, strong anti-interference ability and stable connection signal.
5) built in 300mA polymer lithium battery, which can last for about 3-4 hours after being fully charged.
6) the built-in gyroscope of the handle supports the action sensing function.
7) a motor is built into the left and right handles to support the vibration function.
8) multiple wireless handles can be connected to the host at the same time to play multiplayer games.
9) ergonomic design and lightweight handle construction, even if players play for several hours continuously, they will not feel tired.
10) this handle can be connected to the computer through USB cable to upgrade with the updated software.
2. Nintendo Switch Joy-Con Connecting guidance
2.1 connection method of handle slide rail and host:
A. on the host interface, insert the left and right handles into the slide rails on the left and right of the switch host respectively. When the handles are inserted in place, you will hear the locking sound (there is also a prompt on the screen). When the handles are inserted into the host, the host will automatically connect with the handles and identify the handles.
B. when the handle is in the connection mode of the guide rail slot of the main engine, pull the left and right handles off the main engine (press the lower guide rail lock key at the back first, then pull out the handle). After pulling out, the handle will automatically connect to the main engine, and the handle will display the corresponding channel indicator light. At this time, the handle is in wireless connection mode.
C. for the handle in wireless connection status, if you want to disconnect the current connection, you can briefly press the synchronization key on the guide rail, disconnect the wireless connection of the handle, and the handle will enter the sleep status. Press and hold the synchronization key on the handle for another 3 seconds, the channel indicator light will be on, and the handle will automatically connect with the host wireless.
2.2 Wireless connection method between handle and host: Open the switch host, click "controllers" → "change grip /order" on the host main interface, enter the host pairing mode interface "press L + r on the controller", ignore "L + R", and then follow the steps below:
Note: please connect each handle of the coder in the host pairing mode interface.
2.3) connect the joycon to the console again
A. when the left handle and the right handle are used as an integral handle, press the home key for one second to open the handle,and the handle is automatically connected with the host.
B. when the left handle is used as an independent handle, press the screen capture key for one second to open the handle, and the left handle is automatically connected with the host.
C. when the right handle is used as an independent handle, press the home key for one second to turn on the handle, and the right handle will automatically connect with the host.
3.4) handle back to host
A. in the sleep state of the handle, short press the home key of the right handle or the screen capture key of the left handle to wake up the handle, and the handle will automatically connect with the host.
B. in the sleep state of the host, first press the
power key of the host to wake up the host, and then short press the home key or screen capture key of the handle to connect the host (in the sleep state of the host, directly press any key of the handle to wake up the host.) |
|
|
|
Product Name
|
Nintendo Switch Joy-Con
|
|
|
Material
|
ABS
|
|
|
USB Input
|
DC5.0V
|
|
|
Operate voltage
|
DC 3.6-4.2V
|
|
|
Operate current
|
20-30uA
|
|
|
battery capacity
|
300mAh*2
|
|
|
play time
|
arround 20Hs
|
|
|
Charging time
|
3-4H
|
|
|
Using distance
|
≤8M
|
|
|
Connection
|
Wireless
|
|
|
OEM/ODM
|
warmly welcome
|
|
|
Advatage
|
Wireless connection, built-ingyroscope+vibration motor+color case
|
|
|
samples time
|
1-2day
|
|
|
Packing detailes
|
50pcs/CTN , NW:7.79KG Gross weight:8.79KG 60*43*14CM
|
|
Details Images
Company Profile
Our Factory
Certifications
Payment and Shipping
FAQ
Related Keywords
Related Keywords
You May Also Like
You May Also Like
-
Nintendo Switch 10 in1 Sport Accessories Bundles
Nintendo Switch 10 in1 Bundle for Sport Games
Nintendo Switch oled Wrist Straps(2pack)
Related ProductsProduct Categories-
For P5(16)
-
USB MINI Fan(1)
-
For Nintendo Switch(21)
-
For P4(1)
-
For WII& WII U(2)
-
For Xbox one(1)
-
Headset(16)
-
For X-Series X(3)
-
Game Controllers(127)
-
Controller Charging Station(94)
-
Game Controller Protective Cases(52)
-
Controller Batteries(13)
-
Other Gaming Accessories(29)
-
USB Flash Drives(13)
-
Mobile Accessories(74)
-
For Nintendo Switch OLED(43)
