Best at Home Vacuum Blackhead Remover Instrument

Best at Home Vacuum Blackhead Remover Instrument

Function Usage Method

1. Press the "Switch/Gear Button" for 3 seconds.The product is turned on, the display is on, and the power is turned on. The suction display shows 1st gear. Press this button to turn the gear cycle mode from small to large.

2. Shortly press the "Switch/Gear Button" to turn on blackhead suction function. Short press plus one file, 5 files in total, in the fifth gear, another short press will close the blackhead function.

3. Turn off the blackhead function. Shortly press the“Cold/Hot Switch" (M button) and the product enters into the cold compress mode. Gently apply the chilled probe to the area where the blackhead has been sucked to get the skin cold and help to shrink pores. The blackhead device will work better with the blackhead derived liquid and fine pore essence.

※The body of the device will become hot after using the cold mode for a long time, so please do not use the cold mode continuously. Please turn off the product after using for 30 minutes or more.

1. Press“Cold/Hot Switch" again to switch to the hot mode, and gently apply the hot probe to the part to be sucked to help open the pores.

2. Adjust the blackhead probe to the appropriate position and slowly move the probe in the area where it needs to be treated. Do not suck the same part for a long time. (Before the tip leaves the skin, please open the tip to the side to release the negative pressure air, then you can easily remove it. Do not pull it up or pull it straight to avoid the skin pulling red.)

Specification:

Product pictures:

Best at Home Vacuum Blackhead Remover Instrument