abs plastic parts injection molding services
-
$10.00≥1 Piece/Pieces
- Min. Order:
- 1 Piece/Pieces
- Min. Order:
- 1 Piece/Pieces
- Transportation:
- Ocean
- Port:
- Guangdong, Shenzhen
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | shenzhen |
|---|---|
| Productivity: | 1000 |
| Supply Ability: | 1000 |
| Payment Type: | T/T |
| Incoterm: | FOB |
| Certificate: | ISO9001 |
| HS Code: | Non |
| Transportation: | Ocean |
| Port: | Guangdong,Shenzhen |
ABS plastic parts injection molding operation steps
1, ABS plastic particles must be fully dried before injection, drying for 4 hours in the hot air of 80-90℃, and storage cylinder at least 50 kg, large plastic parts in more than 100 kg.
2. The temperature of the conical injection tube is between 200-275℃.
3. The injection mold should be kept clean so as not to pollute the injection products. The temperature of the mold should be lowered with cooling water.
4, injection pressure in 700-1200kg/c㎡, recommended to set 1400kg/c㎡.
5, release agent is best not to use, if necessary, the use of water-based release agent.
6. If the new material is mixed with the recycled material, the recycled material should not exceed 30%, and the drying time should be extended to ensure that the recycled material is not polluted. It is best not to use recycled material when injection molding bright large flat plastic parts.
7, injection-molded plastic parts, should wear white gloves out, immediately with tape packaging, to prevent the smooth surface of the flower.
8, plastic parts storage using plastic basket storage, avoid extrusion deformation, away from the high-temperature workshop, plastic parts storage each layer separated by cardboard, at most three layers.
9, injection workshop requirements to reduce dust to the minimum, avoid dust adhering to the surface of the mold.
10, the injection speed should be slow, the injection time is long, the tightness is good.
11, the pressure holding time should be 2-5 seconds, the pressure holding time is too short, ABS countercurrent entrance often incurs deformation of the forming product.
Product Details:
Place of origin: China
Plastic molding: injection
Processing services; The molding
Material :ABS/PTFE/PU/PP/PE/ nylon/UHMWPE
Minimum order: 10
Size: Custom size
Product name: Plastic injection molding parts
Application industry: plastic parts
Usage: extensive
Keywords: OEM plastic parts injection molding
Process: Injection mold plastic parts
Services: Custom OEM
Shape: customer design
Product pictures
Related Keywords
