Water purifier pressure sensor with signal strength

Product description

Water purifier water pressure reason :1, check whether the water pressure is stable, adjust the water pressure. Because the tap water pressure is too small, the water purifier pre-low pressure protection can not automatically switch, the unstable water pressure may cause the machine to start frequently, continuous sound, not low will show water shortage and alarm. 2. Test and maintain the high pressure switch to check whether the high pressure switch of the water purifier is faulty due to poor contact. When the water purifier has been working, if the high pressure switch contact is not good, it may cause the water purifier inlet valve to start frequently and emit continuous sound. 3. Check and repair the transformer. Transformer water seepage will lead to short circuit inside the transformer, resulting in noise. 4. Check whether the pre-filter element of the water dispenser is blocked. The filter element of water purifier can not be filtered normally, whether the filter element leakage meets the circuit board. Wipe the filter element again to check whether the installation specification of the filter element conforms to the installation specification of the filter element of the water purifier. 5, water purifier booster pump pressure loss, water purifier pressure can not reach the set pressure, can not automatically shut down, water purification opportunity vibration is too large, friction sound and other problems. Specializing in the manufacture of intake manifold absolute pressure sensor, water purifier pressure sensor, hydraulic pressure sensor, refrigerant pressure sensor, air conditioning pressure transmitter, etc.