PA 6 C Bio TECAST® T EF natural

Get Latest Price

Min. Order:: 1 Kilogram

Min. Order:: 1 Kilogram

Transportation:: Ocean, Air, Express, Land

Port:: Shenzhen, Guangzhou, Hongkong

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Supply Ability:	100
Payment Type:	T/T,Paypal
Incoterm:	FOB,CFR,EXW,CIF,DDP,DDU
Transportation:	Ocean,Air,Express,Land
Port:	Shenzhen,Guangzhou,Hongkong

Product Description

TECAST T EF natural (Bio-PA) is the environmentally friendly alternative to our conventionally manufactured cast nylon, TECAST T natural, and as a biopolymer part of our sustainable solutions.

The bio-based plastic is a molded polyamide (PA6C), and consists of a mass-balanced raw material. It therefore has an reduced CO2 footprint compared to the fossil version.

In terms of properties, the mass-balanced bioplastic is comparable to the fossil fuel based version, and is characterised in particular by good mechanical properties, along with excellent strength and wear properties. The PA6C bioplastic is often used as a substitute material for metals due to its lighter weight, and also exibits advantages over metals in terms of maintenance.

Ensinger produces the cast, biopolymer TECAST T EF natural in the form of PA6C tubes, PA6C plates and PA6C rods.

TECAST T EF natural is part of Ensinger's "Reuse for Tomorrow" solutions, which includes carefully developed products that contribute significantly to environmental protection through their reduced carbon footprint.

Facts

Chemical designation

PA 6 C (Cast polyamide 6)

Colour

ivory

Density

1.15 g/cm3

Main Features

from bio-based/ biomass-balanced raw materials with optimized PCF

good damping

good slide and wear properties

electrically insulating

high strength

good wear properties

resistant to many oils, greases and fuels

high toughness

Target industries

mechanical engineering

food technology

oil and gas industry

automotive industry

heavy duty industry

TECAST T EF natural PA 6 C Bio-based technical data sheet

Mechanical properties
Mechanical properties	Value	Unit	Parameter	Norm
Modulus of elasticity	3500	MPa	1mm/min	DIN EN ISO 527-2
(tensile test)	3500	MPa	1mm/min	DIN EN ISO 527-2
Tensile strength	83	MPa	50mm/min	DIN EN ISO 527-2
Tensile strength at yield	80	MPa	50mm/min	DIN EN ISO 527-2
Elongation at yield (tensile test)	4	%	50mm/min	DIN EN ISO 527-2
Elongation at break (tensile test)	40	%	50mm/min	DIN EN ISO 527-2
Flexural strength	109	MPa	2mm/min, 10 N	DIN EN ISO 178
Modulus of elasticity	3200	MPa	2mm/min, 10 N	DIN EN ISO 178
(flexural test)	3200	MPa	2mm/min, 10 N	DIN EN ISO 178
Compression modulus	2900	MPa	5mm/min, 10 N	EN ISO 604
Compression strength	19/36/83	MPa	1% / 2% / 5%	EN ISO 604
Impact strength (Charpy)	n.b.	kJ/m2	max. 7,5J	DIN EN ISO 179-1eU
Notched impact strength (Charpy)	4	kJ/m2	max. 7,5J	DIN EN ISO 179-1eA
Shore hardness	83		D	DIN EN ISO 868
Thermal properties
Thermal properties	Value	Unit	Parameter	Norm
Glass transition temperature	40	C		DIN EN ISO 11357
Melting temperature	215	C		DIN EN ISO 11357
Heat distortion temperature		C	HDT, Method A	ISO-R 75 Method A
Thermal conductivity	0.38	W/(k*m)		ISO 22007-4:2008
Specific heat	1.7	J/(g*K)		ISO 22007-4:2008
Service temperature	170	C	short term	NN
Service temperature	100	C	long term	NN
Thermal expansion (CLTE)	12	10-5*1/K	23-60°C, long.	DIN EN ISO 11359-1;2
Thermal expansion (CLTE)	12	10-5*1/K	23-100°C, long.	DIN EN ISO 11359-1;2
Electrical properties
Electrical properties	Value	Unit	Parameter	Norm
surface resistivity	1014	Ω		DIN IEC 60093
volume resistivity	1014	Ω*cm		DIN IEC 60093
Dielectric strength		kV/mm		DIN 53483-1
Other properties
Other properties	Value	Unit	Parameter	Norm
Resistance to hot water/ bases	(+)	-		-
Flammability (UL94)	HB	-	corresponding to	DIN IEC 60695-11-10;
Resistance to weathering	-	-		-
Water absorption	0.2 - 0.4	%	24h / 96h (23°C)	DIN EN ISO 62
Water absorption		%	saturation (23°C)	DIN EN ISO 62

Send your message to this supplier

* From:
* To:

Ms. Tina
* Messages:

Enter between 20 to 4,000 characters.

Related Keywords

PA 6 C TECAST T Natural , TECAST T EF Natural Stock Shapes , TECAST T EF Natural Rods Plates Tubes