aluminum led road safety flashing solar road stud

Characteristics for the aluminum led road safety flashing solar road stud:
These solar LED road studs are naturally charged by the sun. As soon as it starts getting dark the LED lights
in the stud come on automatically each night. They have been specifically designed with road safety in mind
and can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning
to drivers in darkness and bad weathers.The solar system of aluminum road stud is conducive for reducing
environmental impact and saving costs and to make the road safety.

parameters of The aluminum led road safety flashing solar road stud:
Large luminous brightness: The luminous brightness of solar road studs can reach more than 2000 MCD, which is 6-7 times that of ordinary reflective road studs (the brightness of ordinary reflective road studs is only 300-400 MCD). High-intensity light can penetrate rain and fog at night , Which can effectively guide the driver in a safe driving direction.

Active lighting for dynamic warning: the active lighting of aluminum led road safety flashing solar road stud allows the driver to not only avoid the interference of rain and fog to a large extent, but also to break away from the dependence on car lights, and the visual distance is longer and the effect is better.

Parameter details of the aluminum led road safety flashing solar road stud:
1. Product material: cast aluminum housing
2. Product specifications: 105*124*25MM 0.35KG/piece
3. Power supply mode: solar battery (monocrystalline silicon) 0.3W 2V/100mAh
4. Energy storage device: a 1.2V/600mAh NI-MH high temperature resistant battery with rechargeable battery
5. Display mode: flashing (2Hz±20%) and constant light
6. Display colors: yellow, red, blue, white, green, amber, etc. or customized wavelength colors.
7. Display device: φ5 super bright anti-fog LED
8. Visual distance: >1000 meters
9. Service life: effective use> 3 years
10. Working environment: -20℃～+70℃
11. Waterproof rating: IP68
12. Start control light intensity: front light is less than 80Lux
13. Product certification: CE, ROHS, IP68 certification

Package description for the aluminum led road safety flashing solar road stud:
 Inner small paper box: (white neutral)
 Size: 105*124*25mm
 Weight: 0.35KG
 2PCS per small white box
 Outer carton: neutral (can be affixed to the first label)
 Net weight/Gross weight: 20KG/21KG
 Carton size: 38*27*28CM
 Quantity: 60pcs/carton

installation steps for the aluminum led road safety flashing solar road stud
1. Positioning: First use a ruler to determine the installation position, ensure that each position is longitudinally in a straight line, the installation distance and design requirements shall prevail, and the installation place shall be flat, dry, clean, and seamless.
2. Glue mixing: glue A for road studs and glue B for road studs. The ratio of glue A and glue B is 1:1 (such as: glue A 1 kg, glue B 1 kg). The glue must be mixed evenly and the color is consistent. .
3. Adhesive: The road surface should be cleaned up during installation, and the glue should be moderate. It should not only stick to the floor of the road studs, but also not overflow too much. About 40 grams of glue is needed for each road stud, and the glue is applied to the bottom surface of the road sign. After installation To clean up road debris.
4. Inspection: Check the installed spikes after two hours.
5. Road closure: It is recommended to close the road for 6 hours to ensure the curing time of the glue.
6. If it is a cast aluminum road stud, the depth of the hole is greater than the depth of the nail foot by 1cm, and the diameter of the hole is greater than the nail foot by 2mm.

Precautions for road stud installation for the aluminum led road safety flashing solar road stud
It is not recommended to install on the side of the road in the middle of the road to avoid excessive impact of the car and damage to the spikes.