PC Sheet Greenhouse Standard Thickness 1000*2000mm

PC board is also called polycarbonate board, Kaplon board, resistant to weak acid. It is made of polycarbonate as the main component and is made of extrusion technology. It has high temperature resistance and good lighting effect. PC sunlight board (also known as polycarbonate hollow) Plate, glass Kaplon plate, PC hollow plate) is made of high-performance engineering plastic----polycarbonate (PC) resin, with high transparency, light weight, impact resistance, sound insulation, heat insulation, Flame-retardant, anti-aging and other characteristics, is a high-tech, extremely comprehensive performance, energy-saving and environmentally friendly plastic sheet, is currently widely used in the international construction of plastic materials, there are other building decoration materials (such as glass, plexiglass, etc.) can not The advantage of comparison.

Pc Plastic Sheet Features:

(1) Transmittance: The transmittance of PC board is up to 89%, which is comparable to that of glass. UV coating board does not produce yellowing under sunlight, fogging, poor light transmission, ten After the year, the loss of light transmission is only 6%, the loss rate of PVC is as high as 15%-20%, and the fiberglass is 12%-20%.

(2) Anti-collision: the impact strength is 250-300 times that of ordinary glass, 30 times of the same thickness acrylic plate, 2-20 times of tempered glass, and there is no crack when it is dropped by 2 meters below 3 kg hammer. The nickname of "broken glass" and "steel steel".

(3) UV protection: The PC board is coated with anti-ultraviolet (UV) coating on one side and anti-condensation treatment on the other side. It is UV-resistant, heat-insulating and anti-drip. It can block UV rays and protect valuable art. And exhibits to protect them from UV damage.

(4) Light weight: The specific gravity is only half of the glass, saving the cost of transportation, handling, installation and support frame.

(5) Flame retardant: The national standard GB50222-95 confirms that the PC board is a non-flammable first grade, that is, B1 grade. The PC board's own ignition point is 580 degrees Celsius, self-extinguishing from the fire, no toxic gas will be produced during combustion, and will not promote the fire. Spread.

(6) Flexibility: It can be installed in an arch shape according to the design drawing at the construction site. The minimum bending radius of the semicircular top and the window is 175 times of the thickness of the plate, and it can also be hot-bent.

(7) Sound insulation: PC board has obvious sound insulation effect, and has better acoustic insulation than glass and acrylic sheets of the same thickness. Under the same thickness conditions, the sound insulation of PC board is 3-4DB higher than that of glass. It is the preferred material for highway noise barriers.

(8) Energy-saving: cool in summer, heat in winter, PC board has lower thermal conductivity (K value) than ordinary glass and other plastics, heat insulation effect is 7%-25% higher than equivalent glass, PC board is separated The heat is up to 49%. Therefore, the heat loss is greatly reduced, and the building used for the heating equipment is an environmentally friendly material.

(9) Temperature adaptability: PC plate does not occur cold-brittle at -100 °C, does not soften at 135 °C, and has no obvious change in mechanical and mechanical properties in harsh environments.

Polycarbonate Sheets Application:

Polycarbonate Rod is widely used in machinery, electronics, automotive, construction, daily necessities, hand model and other fields, and it is rapidly expanding to many high-tech fields such as aviation, aerospace, electronic computers, optical discs, and optical fibers.

PC Sheet Photo:

Company Profile:

Anheda Plastic Group(AHD) was established in 1994 in the first special economic zone in Shenzhen, China. As the earliest manufacturer of engineering plastic semi-finished products, the group was founded with the mission of providing customers with the most competitive products. The Group has strong technical strength, introduces the most advanced imported equipment and the most advanced technology at home and abroad, and constantly innovates technology investment and efficient cost control. It has become the first domestic production and production with imported quality and the price is much lower than the equivalent quality. 

Service:

1.Pre sale

We have 2 factories and 8 branches, and the quality is guaranteed. We can also provide free small samples. The packaging is packaged in iron pallets and tarps. Products can be delivered quickly.

2. Sale

The surface of our products is smooth and clean, edge shaving, size stamping, standard tray export packaging and quality inspection at the time of sale.

3. After sales

If you have any questions after receiving the goods, please feel free to contact us.

FAQ:

Q1: Are you a factory or trade company?

A1: we are a manufacturter for semi-finished engineering plastic sheet & rod like "

Polypropylene Plastic Sheet,Nylon Sheet，Pa6 Rod，Abs Plastic Sheet，Abs Plastic Sheet ，PP Rod and Sheet, POM Sheet, PC Sheet"etc since 1994.

Q2: Is your sample free?

A2:Yes, our samples are free, but the shipping cost is paid by the buyer.

Q3: What about the MOQ ? 

A3:In addition to the sample, the minimum order quantity for a regular size product is 100kgs.

Q4: What about the packing ?

A4:  As per factory's exported standard, usually use steel pallets.

Q5: What about the payment term ?

A5:we accept payment by L/C , T/T, usually 30% deposit is requested before production. 50% deposit is request for customzied items.

Q6: What's your delivery time?

A6:For samples: within 1-3 working days; For orders: within 7-30 working days.