20GM180 the electric motor 12V
- Min. Order:
- 500 Bag/Bags
- Min. Order:
- 500 Bag/Bags
- Transportation:
- Ocean, Land, Air
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | Guangdong Shenzhen |
|---|---|
| Productivity: | 20000pcs/day |
| Supply Ability: | 500000pcs/month |
| Payment Type: | T/T,Paypal |
| Incoterm: | FOB |
| Certificate: | RHOS ISO9001 |
| Transportation: | Ocean,Land,Air |
The market common dc gear motor, working voltage generally have 12 v and 24 v specifications; Speed within 30-120 RPM (also have up to 1000 RPM, but the torque is very small, not suitable for motor) as a robot. The torque in 0.5 KG/CM - 6 KG/CM.
Basically is inversely proportional to the motor torque and speed. If we want to make a load in 5-7 kg robot (smart cars), climbing ability is greater than 20 °, average torque is greater than 3 kg/CM. And the torque range of dc gear motor speed does not generally higher than 100 RPM. Even if some motor can meet the requirements, the volume and often too much. To meet the small volume, low voltage, high speed, high torque requirement, can only be custom made. G25GB57-150/6 metal gear reduction motor is the custom of a robot/electric smart car.
20GM180 the electric motor 12V Product Description:
FF180 electric motor Speed range: 32~2000 RPM
20GM180 motor dimensions:15.5 x 38.0mm
We have a lot of different reduction ratio,Tie-in and different reduction ratio of the reducer, deceleration electric chance to output different rotational speed,In addition to change the speed reduction ratio can change the gear motor, you can change the speed of the motor.
Reduction ratio table :(The "L" is Gear length ,the unit is "mm")
Parameters in a certain range can be customized according to customer's demand
The following is one of the parameters:
|
Parameters of the model
|
VOL TAGE |
NO LOAD |
AT MAXIMUM |
STARTING |
|||||||
|
NOMINAL(V) |
SPEED |
CURRENT |
SPEEP |
CURRENT |
TOROUE |
OUTPUT |
TOROUE |
CURRENT |
|||
|
r/min |
A |
r/min |
A |
mN.m |
g.cm |
W |
mN.m |
kg.cm |
A |
||
|
20GA180-31.2 |
24 |
220 |
0.040 |
185 |
0.090 |
19.6 |
0.2 |
0.2 |
225.4 |
2.3 |
0.42 |
|
20GA180-312 |
6.0 |
23 |
0.1500 |
18 |
0.400 |
196 |
2.0 |
2.0 |
735 |
7.5 |
1.2 |
|
20GA180-78 |
3.0 |
160 |
0.420 |
125 |
1.0 |
88.2 |
0.9 |
0.9 |
588 |
6.0 |
5.0 |
|
20GA180-25 |
12 |
365 |
0.110 |
280 |
0.300 |
39.2 |
0.4 |
0.4 |
117.6 |
1.2 |
1.0 |
|
20GA180-31.2 |
24 |
300 |
0.060 |
255 |
0.180 |
39.2 |
0.4 |
0.4 |
196 |
2.0 |
0.6 |
|
20GA180-31.2 |
3.0 |
120 |
0.120 |
95 |
0.360 |
19.6 |
0.2 |
0.2 |
58.8 |
0.6 |
1.2 |
|
20GA180-250 |
24 |
32 |
0.080 |
25 |
0.180 |
245 |
2.5 |
2.5 |
735 |
7.5 |
3.5 |
|
20GA180-25 |
6.0 |
750 |
0.450 |
570 |
1.1 |
44.1 |
0.45 |
0.45 |
166.6 |
1.7 |
3.5 |
|
20GA180-250 |
6.0 |
30 |
0.160 |
22 |
0.300 |
196 |
2.0 |
2.0 |
686 |
7.0 |
1.3 |
|
20GA180-31.2 |
3.0 |
120 |
0.120 |
95 |
0.360 |
19.6 |
0.2 |
0.2 |
58.8 |
0.6 |
1.2 |
|
20GA180-156 |
9.0 |
75 |
0.150 |
62 |
0.260 |
98 |
1.0 |
1.0 |
539 |
5.5 |
1.6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Our engineering department can provide special designs for different shaft length .
Packaging & Delivery:
Packaging Detail: standard export carton with inner foam in case of being damaged.
Delivery Detail: 20 days after receiving the order and advanced payment of 30%
Company production workshop:
We will test each motor, to ensure that customers receive qualified motor. Mechanization of production to realize full-automatic, further improve the production efficiency and stable product quality.
We have 20 years of experience in design research and development,Products in strict accordance with the standard production in Japan, "the quality first, customer supreme" is our management policy.
Related Keywords
