Modular 8P8C Top Entry Shield With Led Jack

Modular Jack 8P8C Top Entry Shield With Led Jack

 SPECIFICATIONS:
1.Electronical Characteristics:
 1.1 Voltage Rating:125 VAC RMS
 1.2 Current Rating:1.5A
 1.3 Contact Resistance:30 Milliohms Maximum
 1.4 Insulation Resistance:1000 Megohms Min @ 500VDC
 1.5 Dielectric Strength:1000 VAC RMS 60HZ.1MIN.
2.Material & Plating
 1.Housing Material:PBT+30% G.F UL94V-0 BLACK
 2.Contact Material:PHOSPHOR BRONZE,T=0.35MM
 3.Shield Material:BRASS C2680 T=0.25MM
 4 Plating:GOLD PLATING OVER NICKEL 
 5.PCB Retention Pre-solder:1 LBS Minimum
 6.PCB Retention Post-solder:10 LBS Minimum
 7.OPERATION LIFE:750 CYCLES MIN.
 8.LED'S CHARACTERISYICS:
   8-1.POWER DISSIPATION:80MW MAX
   8-2.FORWARD CURRENT:30mA MAX
   8-3.FORWARD Voltage:2.2V TYPICAL
   8-4.REVERSE Voltage:5.0V MAX
   8-5.REAR EMISSION WAVELENGTH:GREEN LED 568nm TYPICAL YELLOW LED 589 nm TYPICAL
   8-6.ANODE CATHODE
3.Environmental:
 4.1 Storage:-40°To +85°
 4.2 Operation:0°To +70°
 4.3 Wave Soldering Temperature:230°To 250° (3-5 Seconds)