MX3.0 180 Wafer With Metal Fork Series Connector

1.product introduction

 A Wire To Board Connectors is an electrical connector that consists of two parts, a plug and a socket.The plug usually has a metal pin or contact point, and the socket has a corresponding jack or contact point, and the circuit is connected and disconnected by inserting and pulling.It is very important for users to correctly select Wire To Board Connectors products.In recent years, Wire To Board Connectors are moving towards smaller trends.The common wire To board connector pitch for handheld consumer electronic devices is 0.40mm;The stack height of 1.00mm is a small connector.Recently, the Wire To Board Connectors used by major original equipment manufacturers are as low as 0.70 mm, and sometimes even lower.

2.product parameter

 SPECIFICATIONS
·Current Rating：5A AC.DC
·Voltage Rating：250V AC.DC
·Withstanding Voltage：1500V AC/minute
·Insulation Resistance:1000MΩ min
·Temperature Range：-25℃-+85℃
·Contact Resistance：10mΩ max
HOUSING
·Part NO.:AW3045SF-2XNP
·Poles：02-24P
·Housing Material：LCP UL94V-0 Natural(Gray)
·Pin Material:Brass/Tin-Plated

3.product picture