The GV300 is a powerful GPS locator designed for vehicle tracking with multiple I/O interfaces for monitoring and controlling. It could help the company, enterprise or origination to locate, manage and coordinate mobile workers, vehicles, equipment and resources in real-time.
GSM/GPS Specifications
Frequency : |
Quad-Band:850/900/1800/1900MHz |
GPS Chipset: |
U-blox All-In-One GPS Receiver |
RMS Phase Error |
5 deg |
Max Out RF Power |
33.0dBm± 2dBm |
Dynamic Input Range |
-15 to -102dBm |
Receiving Sensitivity |
Class II RBER 2% (-102dBm) |
Stability of Frequency |
Greater than 2.5ppm |
Sensitivity: |
Autonomous : -148dBm, Hot start : -160dBm, Tracking: -162dBm |
Position Accuracy: |
Without Aid: 3.0 m 2D-RMS DGPS : 2.5 m |
TTFF (Open Sky): |
Cold start 35s average, Warm start <35s, Hot start <1.2 s |
User Interfaces
Digital Inputs: |
3 Digital Inputs, 1 positive trigger for ignition detection. |
2 negative trigger inputs for panic button or other user. |
|
Analog Input: |
1 analog input(0-2.8V) |
Latched Digital Outputs: |
2 Digital Outputs, open drain, 150mA drive current max |
Relay Output: |
1 Built-In Relay Output. Max output current 2A |
Audio Connector: |
Speaker and microphone on 10pin connector |
Power Connector: |
4 Pin Molex Type Connector |
GSM Antenna: |
Built-in |
GPS Antenna: |
Build-in, external (optional) |
Indicator LED: |
GSM,GPS and Power |
Configuration Serial Port: |
DB9 Connector |
General Specifications
Dimension: |
80mm* 49mm * 26mm |
Weight: |
89g |
Backup Battery: |
Li-Polymer 250 MAH, 3.7V |
Standby Time: |
No report :22~28hr,5minutes` report:10~12hr,10minutes report: 12~15hr |
Operation Voltage: |
8 to 32V DC |
Operation Temperature: |
-30℃~80℃(no battery), -40℃ ~85℃ for Storage (no battery) |
Power Management: |
Fully Power Pathing; Internal battery is no used when external power is available |
Air Interface Protocol
Transmit Protocol: |
TCP, UDP, SMS |
Scheduled Timing Report |
Position reports at pre-set time and distance intervals |
Geo-Fence |
Geo-Fence alarm and parking alarm |
Low Power Alarm |
Alarm when internal battery is almost exhausted |
Power On Report |
Report when the device is powered on |
Tow Alarm |
With built-in motion sensor |
Antenna Disconnect Alarm |
Alarm when the external GPS antenna is disconnected |
Special Alarm |
Special alarm based on the digital/analog inputs. |
Remote Control |
Control the digital outputs through air interface protocol |
Related Keywords