-Infrared LED Lamps-

503FIRC-70L/14I100-60A

700nm IR LED available at Shenzhen Best LED Opto-electronic Co.,Ltd. Peak wavelength is 700nm, viewing angle 60 degree (±30°), chip size is 350um*350um,power output mW @20mA and forward voltage type 1.8V max. 2.3V @ 20 mA. We packaged this 700nm infrared LED with mm epoxy clear lens. As a through-hole LED, there do have kinds of viewing angle for choose, if this 60 degree viewing angle cannot meet your requirement, just feel free to contact us and let us know your inquiry. Then we will produce it as your application. In addition, for 700nm LED, there also have kinds of package way are available in Best LED factory, such as we can change the color of the lens to be like light blue or deep blue as your application, if the 5mm size are too big for you, we can make it with 3mm ect. Do yo need some 700nm LED for your project? Contact us for more detail~

- Size of 5mm  Through-hole LED -

*The short pin is cathode*

*These 5mm through-hole LED are also available for yellow LED, Amber LED, UV LED and other IR LED ect*

-  Through-hole LED Radiant  -

*Colors in the photo was took by camera, please take actual emitting color as standard. 

- 700nm LED XY -

- Electrical Parameters -

Absolute Maximum Ratings At Ta=25℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Optical and Electrical Characteristics( Tc=25℃)

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.7	1.8	2.4	V	IF=20mA
		1.9	2.1	2.5	V	IF=60mA
		2.0	2.2	2.6	V	IF=100mA
Luminous Flux	Φ		0.15		lm	IF=20mA
			0.35		lm	IF=60mA
			0.4		lm	IF=100mA
Luminous Power	PO	5		12	mw	IF=20mA
		20		35	mw	IF=60mA
		25		40	mw	IF=100mA
Radiant Intensity	Ee	50		60	mw/sr	IF=100mA
Peak Wavelength	λP	695	700	710	nm	IF=20mA
Half Width	Dl		17		nm	IF=20mA
Viewing Half Angle	2q1/2		±60		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

* In order to keep every one of LED's long lifespan, BestLED factory use high pure gold wire for inside circuit connection

-  LED Packing -

*We can pack this LED with any number of packages and taped or bend the LED pins as your requirement.

- Relatied -

- Production Process -

- Through-hole IR LED -