Do you think all of the infrared LED are cannot see by our naked eyes? Then you might got it wrong on this case~ Infrared LED do emits red light when they are working. But the more longer wavelength, the less red brightness you will get on. As we know, there have a strong power when you used the 770nm laser diode, you must use it carefully otherwise you will burn yourself. But for this, we packaged this with 770nm LED chip and clear lens. Which is just a light emitting diode part number is 503FIRC-77L/14I100-60A. 770nm infrared LED are widely used for LED grow light, infrared therapy machine ect. There also have kinds viewing angle on this through-hole LED for your choose. Different viewing angle will make different lighting result, you can choose any one of them for your project. Do you need some 770nm LED emitter for your project? Contact us know, this product with long life solid state reliability and low power consumption wont't let you disappointment.

- Size: 5.0*H8.7mm - Chip Number:1 chip - Color: 770nm LED - Type: water clear - Chip brand: Tyntek

- Different color are available - Different wavelength are available - Warranty: 5 Years - RoHS, REACH, EN62471

- Uniform light output - Long life-solid state reliability - Low Power consumption -Anti UV epoxy resin package -High temperature resistance

- Size of 5mm  Through-hole LED -

*This through-hole LED package are also available in UV LED, Amber LED, Yellow LED, 5mm Green through-hole LED, 5mm blue through-hole LED ect.*

-  Through-hole LED Radiant  -

*Colors in the photo was took by camera, please take actual emitting color as standard. 

- Electrical Parameters -

Absolute Maximum Ratings At Ta=25℃ 

Parameter	Symbol	Rating
Power Dissipation	Pd	230mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
1000pcs weight	Bag	0.31g
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Optical and Electrical Characteristics( Tc=25℃)

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.5	1.6	1.8	V	IF=20mA
		1.7	1.8	2.1	V	IF=60mA
		2.0	2.3	2.5	V	IF=100mA
Luminous Flux	Φ		0.03		lm	IF=20mA
			0.09		lm	IF=60mA
			0.14		lm	IF=100mA
Luminous Power	PO	15		25	mw	IF=20mA
		45		55	mw	IF=60mA
		70		90	mw	IF=100mA
Radiant Intensity	Ee	80		90	mw/sr	IF=100mA
Peak Wavelength	λP	760	770	780	nm	IF=20mA
Half Width	Dl		17		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.