insulating high temperature Si3N4 ceramic custom block

insulating high temperature Si3N4 ceramic custom block

Reputation depends on quality,  quality comes from Hard!

Silicon Nitride Ceramic:

The main purpose of the copper insert is to inject the product into some plastic parts, which can form an effective internal thread in the plastic part after installation. The operation method is to embed the product into the plastic part after heating or directly use the mold for injection. Because brass has good thermal conductivity, pressing the copper insert into the plastic matrix after heating can quickly heat the product and speed up work efficiency. The heated copper insert can also quickly conduct heat to the plastic part, thereby making the plastic The periphery of the hole becomes soft, thereby quickly pressing the product into the hole. If mold injection is used, after the copper insert is heat-injected into the plastic part, due to the embossing process on the outer diameter, it will form a certain friction and bite force with the copper insert High Precision Ceramic Network Resistor Substrate Plate after forming, which can be fixed inside so that it cannot fall off.
use
Products are widely used in: mobile phones, High Precision Ceramic Network Resistor Substrate Plate laptop computers, a variety of plastic shells, communications, micro-motors, computers, electrical appliances, electronics, toys, watches, lighting, motorcycles and other industries.
Types of
The main types nowadays are: CNC computer car parts, mobile phone nuts, embossed nuts, hot melt nuts, hot pressed nuts, embedded nuts, ultrasonic nuts, injection nuts, insert nuts, copper shafts, copper columns, copper sleeves, copper cups There are more than 10,000 specifications in 20 categories, including screws, precision shafts and non-standard screws and nuts.
raw material
Mainly include: environmental protection copper, High Precision Ceramic Network Resistor Substrate Plate H3604 copper, Japan 303 stainless steel, 24C easy-car iron, aluminum alloy, and steel.
Shrinkage, shrinkage, insufficient mold, burrs, weld marks, silver wire, spray marks, scorching, warpage deformation, cracking/fracture, size tolerance and other common injection problem description, cause analysis, and in mold design and molding Solutions in process control, product design and plastic materials.
●Cause analysis and solutions for lack of glue and insufficient mold around injection molded parts
●Cause analysis and solutions
●Cause analysis and countermeasures for surface shrinkage and shrinkage (vacuum bubble) of injection molded parts
●Cause analysis and countermeasures of silver streaks (material flower, water spray), burnt and air streaks
●Cause analysis and countermeasures for water ripples and flow lines (flow marks) on the surface of injection molded parts
●Cause analysis and countermeasures for water mark (weld mark) and jet pattern (snake pattern) on the surface of injection molded parts
●Cause analysis and countermeasures for surface cracks (cracks) and top white (top burst) of injection molded parts
●Analysis of the causes of color difference, poor gloss, color mixing, black bars and black spots on the surface of injection molded parts and their solutions
●Cause analysis and countermeasures for warping deformation and internal stress cracking of injection molded parts
●Cause analysis and solutions for dimensional deviation of injection molded parts
●Cause analysis and countermeasures of sticking, dragging (strain) and whitening of injection molded parts
●Insufficient transparency and strength of injection molded parts (brittle fracture) causes analysis and solutions
●Cause analysis and countermeasures for cold spots and peeling (delamination) on the surface of injection molded parts
●Cause analysis and solutions for defective metal inserts of injection molded parts
●Cause analysis and improvement measures of nozzle drooling (runny nose), leaking glue, nozzle drawing, nozzle blockage, difficulty in opening mold
●Using CAE mold flow analysis technology to quickly and effectively solve injection molding site problems

properties:

High hardness, high strength, wear resistance, corrosion resistance, high temperature(1200°), good thermal diffusivity, good thermal shock resistance(avoid the temperature changing rapidly), good insulativity, low density. The comprehensive properties are best in most of structure ceramic.

Data Sheet↓

Application industry:

Machinery, electronic, semiconductor, chemical, petroleum, smelt.

Specific application:

Welding shaft, electronic substrate, plunger, nozzle, slide guide, diesel parts, metal molding, shaft wheels etc.

7.MOQ is not limited, small quantity is welcome.

8.Vigorous team and good after-sales service

Products Show

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory.
 
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
 
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.