quick heat dissipate alumina ceramic bar strip

quick heat dissipate alumina ceramic bar strip

Reputation depends on quality,  quality comes from Hard!

Alumina Ceramics:

The materials used to make the microporous pipe network are: microporous glass fiber hose, pipe diameter φ = 7.5mm; nylon wire for woven mesh φ = 9.5um: resin impregnating solution for the mesh (based on resin, catalyst, initiator Talcum powder, etc.). These braided materials are braided into a pipe network and cured in another specially made auxiliary master mold. After being removed from the mold, it is used to make the master mold. The gypsum used is β-gypsum or α-gypsum. The latter is 1 times higher in flexural strength than the former; the surface micro-hardness is 60% higher, and the tensile strength is about 2 times higher in high mountains. However, the standard consistency water absorption is about 30% lower. Therefore, α-gypsum It is more suitable for making high-strength gypsum models. (3) Microporous resin molds suitable for high-pressure grouting of sanitary porcelain. These microporous resin molds are divided into two types with and without a pipe network. Hygienic porcelain requires high-pressure grouting, common compressive strength-generally not less than 20 MPa, no obvious deformation under the pressure of 10 MPa, water permeability of 0.10 ~ 0.13 m3 / m2s ...

High hardness, high strength, wear resistance, corrosion resistance, high temperacture (1600°), good thermal diffusivity, good insulativity, low cost etc. 

Data Sheet↓

Thermal Shock Resistance: 200 △T°C

Maximum use temperature 1650°C

Dielectric Strength: ＞10 KV/mm

Dielectric Constant: 9.1er

Dielectric Loss Angle(1MHz): 0.0002-0.0003

Volume Resistivity(20°C): ＞1014Ω.cm

7.MOQ is not limited, small quantity is welcome.

8.Vigorous team and good after-sales service

Products Show

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory.
 
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
 
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.