Metal stamping switch shrapnel

Detailed parameters of metal stamping switch and shrapnel.

1. The demand for hardware shrapnel color.

2. Demand for hardware shrapnel impedance.

3. Determine the shape, diameter, raw materials, strength and requirements of the selected hardware shrapnel.

4. The requirements for the size of hardware shrapnel (mold public service is usually within 0.1 MM, and the laser service is usually about 0.2mm).

[note on the use of metal stamping switch shrapnel]

1. In order to avoid repeated impact, please use the initial amount of compression as much as possible.

2. The hardware shrapnel series USES it because the contact surface is unstable and more prone to bending.

3. When the metal shrapnel is nested inside and outside the spring, the spring will be worn by internal and external disturbances and may be damaged.

4. The combination of load, the difference of the load, the relatively low stress concentration of the spring will occur, which can reduce the service life of the product.

5. The installation surface of the hardware spring shall be very smooth, and the spring axis shall be perpendicular to the installation surface to avoid the occurrence of local load.