industrial 2 RJ45 ports media converter

Overview

-Single channel media converter between 10BASE-T / 100BASE-TX and 100BASE-FX-MT-RJ or SC interface
-Automatic adaptation of the twisted pair port speed and duplex mode

NT-IN 312 Industrial Gigabit Ethernet Switch series are 2-port 10/100/1000Base-TX to 1000Base-SX/LX Industrial Fiber Converter. It will extend transmission distance of network up to 100Km via fiber port, and the UTP port can operation at 10M, 100M,1000M application.

-Automatically adapt to MDI-Ⅱ and MDI-X
-Provide switches to configure full / half duplex mode

NT-IN 312 Industrial Gigabit Ethernet Switch series is packaged in a special compact IP40 metal case that allows either DIN rail or panel mounting for easy installation at control cabinet. It provides an integrated power supply with a wide range of voltages for worldwide operation. 

-Store / forward mechanism
-Supports back pressure and IEEE802.3x flow control standards

It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.

-Full wire-speed forwarding rate
-Front panel status LED indicator

NT-IN312 Industrial Fiber Switch series complied with IEEE 802.3at High Power over Ethernet technology (optional).

-Can be used as a standalone device or can be used together with a chassis
-When used together with the chassis, support hot swap 

 It is downward compatible with 802.3af PoE standards to allow users flexibly deploy standard and high powered devices simultaneously with no need of software configuration. With Data and Power over Ethernet from one unit, NT-IN312 Industrial Network Switch series shall reduce cables deployment and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place.

Features

1. Built-in efficient switching core to implement flow control and reduce broadcast packets
2. Standard:IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/FX, IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-SX/LX, IEEE802.3x Flow Control, IEEE802.3at PSE
3. 10/100/1000Base-TX can automatically identify the direct-line(MDI) and cross-line(MDIX), is compatible with Various cards, switches, HUB and other Ethernet devices
4. This Industrial Fiber Media Converter applies a store-and-forward mechanism to avoid packet loss and error frames
5. Support cut-through transmission and full-duplex flow control / half-duplex back pressure mode
6. Jumbo frames support a maximum of 1536 bytes
7. 12V to 48V DC or 24V AC Wide power input, redundant power and reverse polarity protection
8. -40 to 80 ℃ operating temperature to meet a variety of complex environments
9. IP40 protection standard for housing
10. Support Ethernet ESD protection and DC power EFT protection
11. DIN rail and panel mounting for easy installation
12. Support Dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber port selection, expanded the needs of users
13. 12 G switch fabric, 1K MAC address automatic learning table and 512 kb internal data buffer
14. Support max to 2 PSE port, and each port can supply power up to 25.5W(optional)
15. Support SFP fiber module

Specifications

Certification

Application

Dimensions