10G 48 Ports Managed Ethernet Switch

N-net 10G 48 Ports Managed Ethernet Switch

NT-50MG48T4XGF Ethernet switch provides 48 10/100/1000M Ethernet ports, and 4 uplink 10G SFP+ ports, with multilayer exchange capacity and wire speed forwarding capability. Managed switches provide policy-based QoS(Quality of service).Users can set up the functions of switch through Web, CLI, TELNET, SNMP and many other ways. Policy refers to the rules that control the behavior of the switch. Network administrators use policy to allocate bandwidth, priority and control network access for application flows. It focuses on the bandwidth management policy required to meet the service level agreement and the way to publish the policy to the switch.This managed gigabit switch support IP, MAC, VLAN, port, user identification element dynamic or static binding; support port isolation, to prevent communication between 2 neighbor network equipment the same broadcast domain, reduce network risk and greatly enhance the QoS, so that can better meet the quality of service, network security, link protection and other aspects of demand. Most of the switches below the department level are non-network management, only enterprise level and a few department level switches support network management functions.It is very suitable for converged applications of large networks and core applications of small and medium networks.

Managed Network Switch Features

  1. Built-in efficient switching core to implement flow control and reduce broadcast packets

  2. Standard Compliance:IEEE802.3 ad, link aggregation protocol

      IEEE 802.3, 10BASE-T Ethernet

      IEEE 802.3u, fast Ethernet standard

      IEEE, 802.3ab, Gigabit Ethernet standard

      IEEE, 802.3z, Gigabit Ethernet optical fiber standard

      IEEE, 802.3ae, 10G Ethernet standard

      IEEE, 802.3x, full duplex Ethernet data link layer flow control

      IEEE, 802.3az, EEE energy-efficient Ethernet standards

      IEEE, 802.1AB, LLDP protocol

      IEEE, 802.1D, STP protocol

      IEEE, 802.1Q, VLAN standards

  3. Store-and-forward mechanism is employed to avoid packet loss and error frames

  4. 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X, compatible with various Ethernet devices

  5. Support L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping,

  6. DHCP Snooping, LLDP, POE+ management, IP Source Guard, ARP inspection, ACLs etc.

  7. Support spanning tree STP (802.1D) and RSTP (802.1W).

  8. G.8032, support <50ms industrial quick ring protection

  9. Jumbo frames support a maximum of 9.6K kilobtyes

  10. Support cable diagnosis

  11. Support enhanced management through WEB, CLI, TELNET, SSH, SNMP.

  12. -20 ºC To 70 ºC operating temperature to meet a variety of complex environments

  13. Copper ports support ESD protection

Network Switch Instruction

1. Front board have 53 ports, Provide 48x 10/100/1000Mbps downlink Ethernet Ports, 4x 10G uplink SFP+ Ports,

and 1x console ports.

2. LED Indicator State:

PWR:  1 Green light indicates that the power normal work;

SFP+: 4xblue lights indicate that the SFP+ ports is enable

SYS:   1 Green lights indicate system status.

Ethernet: 48 yellow lights indicate 10/100M Ethernet link and speed;

Ethernet: 48 Green lights indicate 10/100M/1000M Ethernet link and speed;

Installation step

Please check below device and accessories before installation, if there are missing, please contact with your supplier.

1. 10G Ethernet Switch                 1PCS

2. User Manual                        1PCS

◆ Please turn off the signal source and the device's power before installing, installation with power on may damage the device;

◆ Use 48 network cables to connect 48 IP cameras with Ethernet switch's 1~48 port;

◆ Use network cable to connect Ethernet switch`s UPLINK port with NVR or Other Device;

◆ Check if the installation is correct and device is good, make sure all the connection is reliable and power for the system;

◆ Connect the power outlet and the switch with the power cord.

◆ Make sure every network device has power supply and work normally.

L2 Managed Switch Application

Gigabit Ethernet Switch information