3535 LED for Medicine
- Transportation:
- Air
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
| Place of Origin: | China |
|---|---|
| Payment Type: | T/T |
| Incoterm: | FOB |
| Certificate: | ISO9001;IATF16949 |
| Transportation: | Air |
Product Description
Product Description
UVC LED Package 3535 60°
- Features
* Emitted Color: UVC
* Lens Appearance: Clean quartz lens
* Dimensions:3.5*3.5mm* Power:25-30mW
* Optical Angle:60 degree
* Current:150mA
* Voltage:6.5V
* Wavelengths: 270-280nm
- Applications
1.Sterilize
- Soldering:
1. Manual Soldering
The temperature of the iron tip should not be higher than 350℃and Soldering time to be within 3 seconds per
solder-pad.
2. Reflow Soldering
Preheating : 140℃~160℃±5℃,within 2 minutes.
Operation heating : 260℃(Max.) within 10 seconds.(Max)
Gradual Cooling (Avoid quenching)
- Storage
In order to avoid the absorption of moisture, it is recommended to solder BINGRI LEDs as soon as possible after
unpacking the sealed envelope.
If the envelope is still packed, to store it in the environment as following:
(1)Temperature : 5℃-30℃(41℉)Humidity : RH 60﹪Max.
(2)After this bag is opened, devices that will be applied to infrared reflow, vapor-phase reflow, or equivalent
soldering process must be:
a. Completed within 168 hours.
b. Stored at less than 30% RH.
(3)Devices require baking before mounting, if:
(2) a or (2) b is not met.
(4)If baking is required, devices must be baked under below conditions:
48 hours at 60℃±3℃
- Tapping and packaging specifications (Units: mm)
* Widely used in surface sterilization,air sterilization,water sterilization,and has a high usage rate in biomedicine.
Related Keywords
Related Keywords
