2000W solar inverter combine controller
Your message must be between 20 to 2000 characters
Contact NowThis 2000W hybrid solar power inverter combine with MPPT solar controller, can charge the battery and support the load.
Feature:
• Professional off-grid solar system solution,which is a combination of big power inverter and solar controller.
• Working modes switch automatically-AC grid bypass mode, inverter mode, AC charging mode,solar charging mode .
• Pure sine wave output which matches wave form of AC grid no matter it on AC grid mode or invert mode; workable on inductive load .
• Remote control & RS232 communication port.
• Power saver mode .
• Four stages smart charging,charging current adjusted autamatically.
• DIP switch optional:Selectable charging voltage for various battery type.
• Manual control input & output breaker.
• AC grid priority & battery priority working mode are selectable.
• AC grid mode: AC bypass supplies load when AC is normal,battery invert AC supplies load when AC is off.
• Battery priority: battery invert supplies load when battery get full charged ; AC bypass supplies load when battery low and at the meantime battery get charged from solar controller. It transfer back to battery invert mode when battery get full charged. It makes full use of solar energy and save electricity
| Model NO. | AL-SCI2000 | |
| Nominal Power | 2000w | |
| AC INPUT | Phase&waveform | single phase & pure sine wave |
| Voltage | 100/120/220/230/240vac | |
| Frequency | 50Hz or 60 Hz(auto adjust) | |
| Voltage range | 95-127vac/194-253vac | |
| Frequency range | 48-54Hz/58-64Hz | |
| AC OUTPUT | wavefrom | single phase & pure sine wave |
| voltage | 100/120/220/230/240vac | |
| Frequency | 50Hz or 60 Hz(auto adjust) | |
| Peak power | 3 times of rating | |
| BATTERY | Battery DC | 12/24/48VDC |
| DC Input | 10-16v/20-32v/40-64v | |
| Over charging | 15.7/31.4/62.8v | |
| Max charging | 20-75A | |
| Battery type | GEL,AGM,Sealed lead acid | |
| MPPT Controller | PV Input | 15vdc-30vdc/30-55vdc |
| Max Charging Current | 20/30/40/50A | |
| Max output current | 15A | |
| TRANSFER EFFICIENCY | MPPT Efficiency | >95% |
| Line mode | >95% | |
| Battery mode | >85% | |
| Power saver | Available when the load is less than 50 Watts | |
| Transfer time | 10ms | |
| INDICATORS | 7-LED Display | From the right to the left, LED1 line mode(green ).LED2 inverter mode(green ).LED3 charging mode(yellow ).LED4 Fully Charged(green ).LED5 over heat shutdown(red ).LED6 Overloaded (red ).LED7 Saving Mode(green ) |
| 2-LED Display | Power,CHG Mode | |
| 3-LED Display | Charging Mode(green lighting).inverter mode(green lighting).Alarm(red lighting) | |
| LCD display | Input Voltage.Output Voltage.Frequency.Battery Voltage.Load | |
| Switch Selector | Saving Mode is on/off when push the switch forwards/backwards, keeping it horisontal | |
| Working mode | AC power priority(1-7)/battery power priority(7-9) | |
| Protections | low battery.over voltage.over temp.over load. | |
| Communications | RJ11/RS232(Optional) | |
| Environmental | Operating Environment | 0-40ºC,0-90%RH(non-condensing) |
| Audible noise | <60dB | |
| Power saver | 486*400*181 | |
| Transfer time | 24KG | |
Related Keywords
