5V Switching Power Supply 200W for LED Display
-
$7.90≥100 Piece/Pieces
- Min. Order:
- 100 Piece/Pieces
- Min. Order:
- 100 Piece/Pieces
- Transportation:
- Ocean, Land, Air, Express
- Port:
- Shenzhen, Shekou
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | Shenzhen |
|---|---|
| Productivity: | 20000pcs per week |
| Supply Ability: | 20000pcs per week |
| Payment Type: | L/C,T/T |
| Incoterm: | FOB,CFR,CIF,EXW |
| Certificate: | ISO9001 |
| HS Code: | 8504401400 |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Shekou |
5V Switching Power Supply 200W for LED Display
Switching power supply works is:
1. AC power input rectified filter into a DC;
2. Through the high-frequency PWM (pulse width modulation) signal control switch, the DC added to the switch transformer primary;
3. Switch transformer secondary induction high frequency voltage, the rectifier filter supply load;
4. Output part of the circuit through a certain feedback to the control circuit to control the PWM duty cycle to achieve the purpose of stable output AC power input generally through the Euler class of things, filter out the interference on the grid, but also Filter out the interference of the power supply to the grid
Details:
|
Model |
S-200-5V |
S-200-12V |
S-200-24V |
|
DC Output Voltage |
5V |
12V |
24V |
|
Iutput Voltage Error |
± 2% |
± 1% |
± 1% |
|
Rated Output Current |
40A |
16.6A |
8.3A |
|
Output Current Range |
0-40A |
0-16.6A |
0-8.3A |
|
Tripple and Noise |
150mVp-p |
250mVp-p |
350mVp-p |
|
Iniet Stability |
± 0.5% |
± 0.5% |
± 0.5% |
|
Tolerance Voltage |
± 1% |
± 0.5% |
± 0.5% |
|
DC Output Power |
200W |
200W |
200w |
|
Efficiency |
76% |
78% |
80% |
|
Adjustable Range for DC Voltage |
4.5-5.6V |
10-13.2V |
20-26.4V |
|
AC Input Voltage Range |
90~132VAC/180~264VAC selected by switch 47~63Hz; 240~370VDC |
||
|
Input Current |
4.5A/115V 3/230V |
||
|
AC Inrush Current |
Cold-Start Current: 25A/115V, 50A/230V |
||
|
Leakage Current |
<3.5mA/240VAC |
||
|
Overload Protection |
105%~150% Type: Cut Output, Reset: Auto Recovery |
||
|
Over Voltage Protection |
Yes |
||
|
High Temperature Protection |
Yes |
||
|
Temperature Coefficient |
± 0.03% /°C (0~50°C) |
||
|
Start, Rise, Hold time |
200ms, 100ms, 20ms |
||
|
Vibration |
10~500Hz, 2G 10min,/1cycle, a total of 60 minutes, Each axes |
||
|
Withstand Voltage |
Between Input and Output: 1.5KVAC, Input and Shell: 1.5KVAC, Output and Shell: 0.5KVAC |
||
|
Isolation Resistance |
Input and Output Intermal: Input and Enclosule, Output and Enclosure: 500VDC/100M Ohms |
||
|
Working Temperature and Humidity |
`-10°C~+60°C (Refer to Output Dreating Cutive), 20%~90%RH |
||
|
Storage Temperature and Humidity |
`20°C~+85°C, 10%~95%RH |
||
|
Overall Dimension |
20*9.8*4.6cm |
||
|
Weight |
383g |
||
|
EMC Standards |
Meet FCC Part 15J Conduction class B |
||
Please Note:
1. The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%Rh, Humidity.
2. Error, include the setting error, line stability and load stability.
3. Wave test: adopting "A12" double wire for 20MHZ, and 0.1uF capacitor short-circuit for interrupting.
4. Inlet Voltage Stability test: when is over load, the lowest voltage of inter is representative to the highest voltage.
5. Load stability test: the load is from 0% to 100%, others 60%.
6. C3.4 must be knocked down.
Applications:
•Office , Artwork, Display items lighting;
•Household lighting;
•Commercial lighting, such as Flood light, Down light, Flexible strip light, Wall washer, etc;
•Hotel, Restaurant lighting;
•Other public facility lighting.
Related Keywords
