Promotes Wound Healing Skin Rejuvenator Battery Operated 89

Promotes Wound Healing Skin Rejuvenator Battery Operated 89 X 89 X 222 MM

Why to choose our products:

The product:

The OZ200’s design is streamlined and light weight, making it suitable for the user to hold for long periods of time without arm fatigue.
Before using the unit, thoroughly clean the skin with water. The glass surface of the unit generates a thin layer of pure ozone when it comes in contact with skin. Gently rub the glass surface on the skin area where the ozone is required.
Ozone will remove bacteria, germs and micro-organisms by oxidation. It will also bleach dark spots, reduce freckles, and is highly beneficial for the regeneration of healthy skin cells. It promotes skin healing, and soothes skin itchiness. It can also remove arm pit odors, but make sure that the skin area is dry before applying the OZ200.

Description:

1 pure ozone generated between skin and glass surface on contact.

2. Skin is cleaned by ozone and electrostatic charges.

3. mites and bacteria are removed.

4. Ozone output within international safety limits.

5. adjustable ozone output control.

6. Battery operated (2*AA) alkaline for about 8 hours.

7. optinal 15-minute auto switch off to prevent over usage.

The package:

There are four items in the box:

The OZ200 unit

Holding base

Two AA alkaline batteries

The instruction manual

Packing details:

Product size: item (L) 89 * (W) 89 * (H) 222mm

Packing: 267*140*127mm

Master case pack/weight: 6 pieces/ 2.3kg

Master case dimensions: 267*279*406mm

Warning:

1. Due to the fact that high voltage static electrical charge can build up on the body of the user, mild electric shocks can occur in certain environments on rare occasions. however, this discharge should not cause bodily harm, beause the electrical energy is very small .

2. It is strongly recommended the user not use the oz200 for more than 30 minutes each time.

3. After replacing the batteries, make sure that the silicon base cover is put back in place in order to avoid possible electric shocks during use.

4. Before use, please wash skin with warm water and make sure the skin area is free from any cream or make up. as ozone is capable of oxidizing anything in its way, contact with unknown materials or substances may result in unknown effcts on the skin.

5. bsoutely do not connect this product to other outside power sources. there is high voltage inside, even on the battery shell.

Installation:

Remove the silicon end cap, unclip the battery cover, and insert the two alkaline batteries supplied. Please note that the terminal with a spring is the negative terminal of the battery. Make sure that the cover is fitted properly, for it is also a safety switch to prevent high voltage electricity from leaking out. No current will flow if the cover is not fitted properly.

Operation:

Press and hold the only button gently for about three seconds to switch on the unit, as indicated by the green LED. This time delay is to prevent the unit from being switched on accidentally by the user or by children. Press the button once to switch the unit off.
The two alkaline batteries should last 6 hours. Replace with new alkaline batteries when the LED indicator light becomes dimmed.

Notes:

• It is recommended not to keep the device on any particular spot for more than 10 minutes, and not to use the device for more than 30 minutes at a time.
• Alkaline AA batteries must be used because the unit requires even discharge characteristics.
• Do not try to dismantle the unit for repair. There are no serviceable parts inside.
• Only use a dry cloth to clean the glass surface and the unit.
• Avoid contact with water at all times.
• As the glass surface itself is constantly coated with ozone, when used by another person, there is no need to disinfect OZ200, as ozone is a powerful antiseptic itself.