Epoxy Resin AB Glue for LED Potting

Specifications 1.Good fluidity

2.Easy to pot

3.Crystal clearness with 3D effect

4.Main for LED signs, nameplate and decorations and so on

                            MTB-1703 LED POTTING EPOXY RESIN AB GLUE TDS               Characters   It is two-component polyurethane resin glue, do not contain any solvents and volatile matter, forming a crystal clear after curing, glittering in the protective coating. The thickness generally in 1.50 to 2.00 mm forming three-dimensional effect, can be widely used in all kinds of signs, nameplate and decorations.       After curing ,it has extremely excellent weathering resistance and ultraviolet resistance, can be in outdoor use for a long time, can fully meet the requirements of the LED soft light strip potting, under outdoor sunlight BZ320 can ensure more than 8 years not yellowing.           Conventional Performance  

Item	MTB-1703 A	MTB-1703B
Appearance	Transparent /light yellow liquid	Transparent /light yellow liquid
Mix Ratio(by weight)	1	1
Viscosity(@25°Cmpa·s)	1500±200	1200±200
Density(@25°Cmpa·s)	1.13±0.05	1.05±0.05
Storage(below 25°C)	6 months
Operating Time(@25°C,90g)	About 25-30mins
Curing time (heating to 60°C)	2.5h

      Cured Character  

Item	MTB-1703
Appearance	Clear with good glossy effect ,no ripple
Hardness(Shore-A)	85±10
Tensile Strength(Mpa)	>2
Elongation at break (%)	>200

      Package   We have5KG/pc,20KG/pc,50KG/pc and 200KG/barrel for your choice.           Remark for storage and transportation   1. It is non-dangerous goods, according to the general chemical transportation.
2.Please at 15% to 25 °C relative humidity < 50% conditions, avoid light honey store closed, the shelf life of product packaging barrels.
3.Manual drip, please according to the proportion of correct weighing, stir fully, weighing more than 100 g, can use time will be shorten.