Cree lamp Outdoor SMD LED Display Boards P8 High brightness
- Min. Order:
- 1
- Min. Order:
- 1
- Delivery Time:
- 30 Days
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | China |
|---|
P8 Cree lamp SMD Outdoor LED Display High brightness for advertising
Specifications:
|
Unit module |
Pixel pitch |
8 mm |
|
Pixel density(dots/sqm) |
15625/sqm |
|
|
LED encapsulation |
SMD3535 |
|
|
Driving method |
1/4 |
|
|
Module size(mm) |
256*256mm |
|
|
Resolution of module( dots) |
32*32 |
|
|
Major technical parameters |
Cabinet size |
1024*1024mm |
|
Brightness |
7500cd/ ㎡ |
|
|
Refresh rate |
>2000HZ |
|
|
Color temperature |
6500K |
|
|
View angle(H/V) |
160°/140° |
|
|
Grey scale |
16bit |
|
|
Brightness adjustment |
256 grade/ Manually/ Automatically |
|
|
Working/ storage temperature |
-20℃~50℃/ -30℃~60℃ |
|
|
Working/ storage humidity |
10%~90% RH |
|
|
Working voltage |
AC220/110V 50Hz |
|
|
Protect degree |
IP65/IP54 |
|
|
MTBF |
>5000h |
|
|
Life span |
100000h |
|
|
Input Signal |
AV, S-VIDEO, VGA, DVI, HDMI, SDI, DP |
|
|
Operation system |
Windows 7/XP |
|
|
Control distance |
cat-5 data cable:<100m, optical fiber<15km |
Quick details:
pitch: P8 mm
module resolution:32*32
module size: 256*256mm
cabinet size: 1024*1024mm
Description:
1. Good waterproof protection: Front is IP65 and back is IP54. Before ageing in factory, we make water proof test with pouring water. There is totally no problem for outdoor application.
2. Good color uniformity: Since 3 LED chips are encapsulated in one lamp, SMD color uniformity is much better than DIP so the showing effect is perfect.
3. Big view angle: SMD view angle is bigger than DIP.Its view angle is 160°for horizontal and 110°for vertical.
4. Anti-low temperature: for very cold areas such as Russian market, we should pay special attention
to the cold temperature. So we will use anti-low temperature power suppliers and special heat system to warm the display.
5. Good heat output system for high temperature: For hot ares, heat output system is specially important. Or else, the whole display will become hot and there will be dangerous. So we help clients to reduce current and also make add fans for screen.
6. Energy saving: power consumption is a key factor for LED billboard. BAKO’s LED display is designed with low power consumption to help clients to save energy.
7. High brightness: For outdoor application, brightness is important, especially if the LED display faces the sun directly. BAKO’s outdoor display brightness can be above 7500 nits, completely ensure the requirement for outdoor application.
8. Adjustable brightness: In the daytime, brightness should be high. But in the evening, it should be reduced for traffic safety. BAKO’s LED display can make the brightness adjusted automatically. Also, this method can help to save much energy.
9. Both front and rear service: For some special application, front service is a must. BAKO makes new design for SMD outdoor LED display. The design keeps good uniformation and prevent the gap between cabinets.
Competitive Advantage:
1) module frame and cabinet can be applied for both P8 and P12.8
2) there are always big size stock for urgent needs
3) clients can send engineer to our factory for free training
4) we can offer full solution for clients
