Shenzhen HDVphoelectron technology LTD.
Shenzhen HDVphoelectron technology LTD.
1000m Media Converter
  • 1000m Media Converter
1000m Media Converter

1000m Media Converter

Min. Order:
1
Min. Order:
1
Quantity:

Your message must be between 20 to 2000 characters

Contact Now
Basic Info
Basic Info
Product Description
Product Description

Intro: The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer. Using media converter is a economical solution to achieve long distance transmission base on current status.
Brief introduction
This product supports IEEE802.3z 1000Base-Tx/Fx protocol, as well as full duplex and half duplex mode. This manual is for 1000M transceivers.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 1000 meter. It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair. And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver. Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol: IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC 48VDC

5. Environmental temperature: 0-60ºC
6. Relative humidity: 5%-90%
7.Storeage temperature:-20-70ºC
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm

single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm


Ordering information
HDV-MGP


Description

Fiber mode

TX power

Rx power

Wavelength

Distance

HDV-MGPMA-11-05

Multi-mode dual fiber

-17~-12

<<-20.0

850nm

550m

HDV-MGPMA-11-2

Multi-mode dual fiber

-17~-12

<<-20.0

1310nm

2 Km

HDV-MGPSA-11-10

Single-mode dual fiber

-6~-12

<<-21.0

1310nm

10 Km

HDV-MGPSA-11-20

Single-mode dual fiber

-3~-8

<<-23.0

1310nm

20 Km

HDV-MGPSA-11-40

Single-mode dual fiber

-3~0

<<-25.0

1550nm

40 Km

HDV-MGPSA-11-60

Single-mode dual fiber



1550nm

60 Km

HDV-MGPSA-11-80

Single-mode dual fiber

>>1

<<-27.0

1550nm

80 Km

HDV-MGPSB-11-10A/B

Single-mode single fiber

-10~-5

<<-20.0

A side:Tx1310nm/Rx1550nm
B side:Tx1550nm/Rx1310nm

10 Km

HDV-MGPSB-11-20A/B

Single-mode single fiber

-8~-3

<<-23.0

A side:Tx1310nm/Rx1550nm
B side:Tx1550nm/Rx1310nm

20 Km

HDV-MGPSB-11-40A/B

Single-mode single fiber

-3~-0

<<-23.0

A side:Tx1310nm/Rx1550nm
B side:Tx1550nm/Rx1310nm

40Km

HDV-MGPSB-11-60A/B

Single-mode single fiber

-3~-0

<<-23.0

A side:Tx1310nm/Rx1550nm
B side:Tx1550nm/Rx1310nm

60Km


Send your message to this supplier

  • Ms. linda

  • Enter between 20 to 4,000 characters.