christmas ornaments rechargeable design 6 inch led light base

Key features:

1. Remote controlled light base

2. 6" diameter, 1.5" height

3. 23 super bright RGB LED lights

4. Built-in rechargeable Lithium battery

5. 3 * AA batteries and adapter power options

Packaging:

1pc/ white box, 20pcs/ CTN

Box size: 16.3*4.4*16.5cm

CTN size: 47.5*17.5*36cm

G/W:8.2kgs, N/W:7.12kgs

Specifications:

1. Pearl white housing with clear non-slip grip top.

2. Artfully designed reflect plate enhances light diffusion.

3. 23 super bright RGB 5050 SMD LED lights illuminate in 13 beautiful colors.

4. 3 settings: 13 fixed color, color merge through sequence, instant color change.

5. On fixed colors, the brightness could be adjusted in 5 grades.

6. Power supply:

A. Built-in rechargeable 2000 MAh Lithium battery keep the lights on colors of red, green and blue for about 100 hours. Charge the battery takes 4.5 hours. There is over-charge protection to keep charging safe.

B. 3 AA batteries. (Not include) keep the lights on colors of red, green and blue for about 100 hours.

C. AC adapter. Charge the built-in battery and make the lights working.

The lights will automatically choose one from the above 3 power supplies accordingly. The 3 power supplies can work safely and will not affect one another.

7. Use remote controller to turn on/off the lights and choose the colors you like or the settings you want. Control distance is about 8--10 meters in open area.

RF Remote Controller Instructions:

1. Take out the light from the package and put it on flat place.

2. Install 3 AA batteries properly in the battery compartment.

3. Press the red button on all the light bases that you need as a group to switch them on standby.

4. Press the button 2 on the remote until the light bases are flickering. Then press button 7 to confirm.

5. If you want a second remote to control this group of light bases, you can press the button 2 on the second remote until the light bases are flickering, and then press button 8 to confirm. And this group of light bases can be controlled by 2 remotes. You can do the same but press 9 at the end to have the third controller for the same group of light bases. And you can have at most 3 controllers for a group of light bases.

6. Press button 1 to turn on the lights, and 3 to turn them off.

7. When the light bases are on, press button 4 for red,5 for green,6 for blue and 10 for white color.

8. Press button 7 three times, you will have 3 different colors, so are buttons 8 and 9.

9. Press button 11, the colors will automatically switch from one to another smoothly.

10. Press button 12, the colors will automatically switch from one to another quickly.

11. Press button 12, the light bases will be reset to the brightest red color.

12. Press button 14 to decrease the brightness of solid color, and press button 15 to make brighter.

13. If the distance is further than 30 meters, please take out the antenna of the remote controller.

Power Options Instructions:

Ⅰ. Use the built-in Lithium battery:

Ⅱ. Use 3 AA batteries:

1. Remove the battery compartment at the reverse base

2. Insert 3 AA batteries into the compartment according to the polarity shown and replace compartment

3. Go steps as Ⅰ.1--Ⅰ.10 to use the light

Ⅲ. Use AC adapter:

1. Request an adapter with 5V & 2 AH output

2. Connect the cable to the adapter and the light and plug the adapter to the outlet

3. Go steps as Ⅰ.1--Ⅰ.10 to use the light

4. If the red indicator is on, the built-in Lithium is being charged; if the green indicator is on, the battery charging is completed.

Note: The AC adapter can only charge the built-in Lithium battery. The 3 AA batteries in the battery box will not be charged through the adapter.

We can use the light while charging the built-in Lithium battery.