Excel DL/L lactide,High Purity

Industrial grade L-lactide from Esun   2.Product Information

Product Name	Surname	Other Name	CAS#	Purity
Lactide	L Lactide	(3S)-cis-3,6-Dimethyl-1,4-dioxane-2,5-dione)	004511-42-6	95.5%~99.9%

  3.Hazards Identification Causes skin and eye irritation. HazardRatings: These ratings are Brightchina own assessments of the properties of the material using the ANSI/NFPA704Standard. Additional information can be found by consulting in the NFPA published ratings lists (List325andList49). If no details listed the information is not available. Health  Flammability  Reactivity  1         1          0   4.First aid measures Contact medical personnel if discomfort persists. -Skin contact Remove contaminated clothing and shoes.Wash skin thoroughly with deluge of water for at least 15 minutes. -Eye contact Flush eyes with flowing water for at least 15 minutes. -Swallowed Wash out mouth with water if person is conscious.   5.Fire-fightingmeasures General Information:  As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.   6. Accidental Release Measures General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container.   7.Handling and Storage Handling: Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Storage: Keep refrigerated. (Store below 4°C/39°F.) Store in a tightly closed container. Store in a dry area.   8.Exposure Controls, Personal Protection Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.   9.Physical and Chemical Properties Configuration:crystal flaky      Color:white Modular Fomular: C 6H 8O4     Modular Weight:144.1 Melting Point:95-98°C        Water Content:≤1000ppm Purity:≥99.5%              Acid Content:≤0.1%   10.Stability and Reactivity Chemical Stability: May decompose on exposure to moist air or water. Conditions to Avoid: Incompatible materials, exposure to moist air or water. Incompatibilities with Other Materials: Strong oxidizing agents, acids, bases

Hazardous Decomposition Products:  Carbon monoxide, carbon dioxide.  Hazardous Polymerization:  Never occur 11.Toxicological Information
RTECS#:	CAS#4511-42-6: JH1100000
LD50/LC50:	RTECS: CAS# 4511-42-6:Oral, rat: LD50 = >5 gm/kg; Skin, rabbit: LD50 = >2 gm/kg;
Carcinogenicity:	(3S)-cis-3,6-Dimethyl-1,4-dioxane-2,5-dione)- Not listed as a carcinogen by ACGIH, IARC, NTP, or CA Prop 65.
Other:	The toxicological properties have not been fully investigated. See actual entry in RTECS for complete information.

  12.Ecological Information Not available   13.Disposal Considerations Dispose of in a manner consistent with federal, state, and local regulations   14.Transport Information Not regulated as a hazardous material   15.Regulatory Information 

European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: XI Risk Phrases:R 36/37/38 Irritating to eyes, respiratory system and skin. Safety Phrases:S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 37/39 Wear suitable gloves and eye/face protection. WGK (Water Danger/Protection):CAS# 4511-42-6: Not available

Canada CAS# 4511-42-6 is listed on Canada's NDSL List US Federal CAS# 4511-42-6 is listed on the TSCA Inventory.

  Lactide Package, Transport, Storage Notice   1, Lactide Package  Double package. Inner is plastic bag and outer is sealed vacuum aluminumplating bag. Generally 10gram/bag and 100gram/bag are provided. Customer's special requirement are also available. 2, Lactide Transport Refrigerated transport are preferred. Under normal circumstance, logistic and express also work. During transportation, the friction between bags can make damage to the AL-plated bag and make the seal invalid. 3, Lactide Storage Keep in the vacuum environment under 4°C;or refrigeration storage. Avoid keeping the bag open in the air and storage in room temperature to prevent its hydrolysis. 4, Abnormal Lactide  Good lactide is dry white crystal. And when there is hydrolysis, pastiness will appear. We suggest that treat the abnormal lactide with ethyl acetate before use. 5 ,Kindly remind: Please check at the receiving and if there is abnormal situation, keep us informed in 5 work days. Or the lactide will be recognized accepted by the customer.