Hobbywing Ezrun 4000 KV 8.5T Brushless Motor & Ezrun 60A Program ESC Combo B5

Specifications 1.Hobbywing Ezrun 4000 KV 8.5T Brushless Motor & Ezrun 60A Program ESC Combo B5

2.Specially designed for RC car

3.For RC Car

Features -Compatible with all sonsorless brushless motor.
-Use top quality electronic components to enhance the current endurance ability of the ESC.
-Excellent start-up, acceleration and linearity features.
-With 2 running modes (Racing mode and Forward/Backward mode).
-With 4 steps of maximum reverse force adjustment.
-Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
-With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
-Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
-With 8 steps of timing adjustment to get the best compatibility with various of motors.
-Easily program with only one button and compatible with pocket-sized program card.
-Motor uses top quality materials: 
1. Aluminium shell (case)
2. High quality magnets
3. Copper wires of high temperature endurance
4. Good quality bearings.
-Dustproof design for the motor   Product Details -Output:  Continuous current 60A, burst current 380A.
-Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo. 
-BEC Output: 6V/1.5A.
-Resistance:  0.0007 Ohm
-Motor Supported:  Sensorless Brushless motor.
-Suitable Brushless Motor:   Note2
        eZRun-60A-SL:   >=5.5T (Size: 3650)
-Suitable Car:  1/10, 1/12 on-road and off-road car for sportful race
-Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
-Weight: 32g(Without wires).
-KV:4000 -Diameter:36.0MM
-Length(Without Shaft):50.0MM
-Shaft:3.17MM
-Shaft Length:15MM
-Weight:200g
Note1:  
For 4-6 cells NiMH or 2S Lipo: You needn’t change the cooling fan coming with the ESC;
For 7-9 cells NiMH or 3S Lipo: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);
Note2:
The values of  "T" number is tested under the following conditions:
a) The input is a 6 cells NiMH battery;
b) The ESC is equipped with a cooling fan. Item Packing -eZRun-60A-SL brushless ESC V2 x 1
-3650/4000KV/8.5T sensorless brushless motor x 1
-Program card for car ESC x 1
-Cooling Fan x 1