Building tempered laminated glass

Specifications Tempered glass is strong and safety

Anti-impact and Anti-bending

Heatproof and bullet-proof performence

UKAS&CCC&ISO9001

Fully-Tempered Glass:
1.About four times stronger than normal float glass of same thickness
2.Better resistance to thermally induced stress
3.Typically breaks into classic tiny piece pattern
4.Occasionally can experience spontaneous breakage due to nickel sulfide inclusion.
Heat-Strengthened Glass:
1.About two times stronger than normal float glass of same thickness
2.Good resistance to thermal loads than normal float glass
3.Typically breaks into larger pieces
4.Less prone to spontaneous breakage than tempered glass
Product Specification;
Max. Size: 3050mm ×8400mm Min. size: 200mm×300mm
Substrate:
Glass Type Thickness
Clear 2.8mm25mm
Tinted 3mm12mm
Applications:
1.Suitable for use in spandrel/vision areas where needs good resistance to wind load & thermal stress .
2.Suitable for where safety glazing needed.
3. Appropriate for interior & exterior glazing. Half-Tempered Glass:   1, Its performance of impact is 24-69MPA, the machine intension is 1.62.0 times than normal glass and have excellent heat stability. 2, High eveness level, light transmittance is near the normal anneal glass panel. It is better than Fully-Tempered Glass. And it could not blast-self. Product Specification;
Max. Size: 3000mm ×8000mm Min. size: 200mm×300mm Thickness: 2.8mm-25mm