High Brightness 600*600 60W Side-Emitting LED Panel Light
- Payment Type:
- L/C
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
| Place of Origin: | Shenzhen |
|---|---|
| Payment Type: | L/C |
Product Description
Product Description
High Brightness 600*600 Side-Emitting LED Panel Light
Application
This product apply to office building, shopping mall, super market, school, hospital, hotel, parking lot, workshop, government projects, household etc.
Product advantages
1). Energy-saving: adopt low power SMD4014 & SMD2835 lighting source, saving 80% energy than incandescent lamp
2). ECO- Friendly: No Hg or Pb etc harmful substance, pollution-free for environment, no infrared or UV, avoid the harm for human body, belong to green lighting product.
3). Long Lifespan: over 30,000hours
4). This product use small power chip to avoid the highly-focus heating source, also use high efficiency heat-conducting silicone pad to increase the lifespan of lamp.
5). Adopt the constant current led driver, no strobe.
6). Unique lighting emitting design, adopt high quality light guide plate to form even, soft and comfortable light.
Product features
Product technical parameters
Installation notes
1. A professional person who have electrician certificate to install the lamp
2. To check the completeness of the lamp when you take it out from the carton
3. The lamp should at least keep 0.2m distance from the inflammable material, make sure the mounted ceiling is 2cm distance, and the lamp cannot be entirely installed inside the ceiling, or the heat source wall. Separate the low voltage and high voltage wire.
4. The line of the lamp can go through from the hole and fixed with cable clip
5. Make sure the power line of the lamp have enough length, free from tension and tangential force. Don't pull the link line strongly. Don't let the link line tie a knot. Distinct the output link line. Don't mix with other lamps.
6. When the lamps are well installed, connect the plugs of lamp and switching power supply
7. Connect the wire of switching power supply with mains supply, usually the Brown (or black) is live line, blue is null line.
8. Use the led driver, not mix with other lamps
9. Don't tear off the nameplate of the led driver.
Package
Transportation and storage requirements
1. Stick the main mark and side mark on the carton, also stick the label on the lamp.
2. Pack it well, handle it gently, write product name and quantity on the carton.
3. Storage requirements: damp-proof, dust-proof, prevent pressing and falling down, avoid the sunlight shine directly and the moisture condensation.
4. Storage life: 1 Year. Recheck the electric properties of lamp when it is over the validity.
Application
This product apply to office building, shopping mall, super market, school, hospital, hotel, parking lot, workshop, government projects, household etc.
Product advantages
1). Energy-saving: adopt low power SMD4014 & SMD2835 lighting source, saving 80% energy than incandescent lamp
2). ECO- Friendly: No Hg or Pb etc harmful substance, pollution-free for environment, no infrared or UV, avoid the harm for human body, belong to green lighting product.
3). Long Lifespan: over 30,000hours
4). This product use small power chip to avoid the highly-focus heating source, also use high efficiency heat-conducting silicone pad to increase the lifespan of lamp.
5). Adopt the constant current led driver, no strobe.
6). Unique lighting emitting design, adopt high quality light guide plate to form even, soft and comfortable light.
Product features
| Shell | Aluminum Alloy |
| Surface Of lamp | Sliver & White |
| Heat Sink | 6063 Aviation Aluminum |
| Aluminum | One LED broken down, others can be work normally |
| Base | PMMA LGP +PS/PC Diffuser |
| Diffuser Light | LED SMD2835 &SMD4014 |
| Source | TUV \CUL\SAA\ENEC\FCC\CE\PSE etc approval |
| Driver CCT | 2500-7000K |
| Product Model | PT-P6606040W-A2 | PT-P6606050W-A2 | PT-P6606060W-A2 |
| Rated Power | 40W±5% | 50W±5% | 60W±5% |
| Input voltage | 100V-240V AC,Max277V | 100V-240V AC,Max277V | 100V-240V AC,Max277V |
| Input Current | Max 0.7A | Max 0.8A | Max 0.8A |
| Working Frequency z | 50/60Hz | 50/60Hz | 50/60Hz |
| THD | <15% | <15% | <15% |
| Power Factor | >0.90 | >0.90 | >0.90 |
| Power efficiency | ≥86% | ≥86% | ≥86% |
| Output Voltage voltage/current | Voltage:27-42VDC Current:1000mA±5% | Voltage:27-42VDC Current:1200mA±5% | Voltage:27-42VDC Current:1500mA±5% |
| Lumen for Single led | ≥55-60lm/150mA | ≥55-60lm/150mA | ≥55-60lm/150mA |
| LED Chip | SMD4014/SMD2835 | SMD4014/SMD2835 | SMD4014/SMD2835 |
| LED Qty | 120PCS | 192PCS | 240PCS |
| CCT | 2700-7000K | 2700-7000K | 2700-7000K |
| Luminous flux | 3300±10%LM | 4200±10%LM | 5000±10%LM |
| Beam angle | 120° | 120° | 120° |
| CRI | ≥80 | ≥80 | ≥80 |
| Work temperature | -20~+45ºC | -20~+45ºC | -20~+45ºC |
| Storage temperature | -30~+65ºC | -30~+65ºC | -30~+65ºC |
| Life time | 30,000H | 30,000H | Life time |
| IP | 40 | 40 | 40 |
1. A professional person who have electrician certificate to install the lamp
2. To check the completeness of the lamp when you take it out from the carton
3. The lamp should at least keep 0.2m distance from the inflammable material, make sure the mounted ceiling is 2cm distance, and the lamp cannot be entirely installed inside the ceiling, or the heat source wall. Separate the low voltage and high voltage wire.
4. The line of the lamp can go through from the hole and fixed with cable clip
5. Make sure the power line of the lamp have enough length, free from tension and tangential force. Don't pull the link line strongly. Don't let the link line tie a knot. Distinct the output link line. Don't mix with other lamps.
6. When the lamps are well installed, connect the plugs of lamp and switching power supply
7. Connect the wire of switching power supply with mains supply, usually the Brown (or black) is live line, blue is null line.
8. Use the led driver, not mix with other lamps
9. Don't tear off the nameplate of the led driver.
Package
| Name | Size | Qty | Weight | Description |
| Inner Box | L660*W85*H360mm | 2pcs | Net. W. | 3.3KG 2pcs/Inner box |
| Outer Box | L670*W290*H385mm | 6pcs | Gross. W. | 23KG 6pcs/Carton |
1. Stick the main mark and side mark on the carton, also stick the label on the lamp.
2. Pack it well, handle it gently, write product name and quantity on the carton.
3. Storage requirements: damp-proof, dust-proof, prevent pressing and falling down, avoid the sunlight shine directly and the moisture condensation.
4. Storage life: 1 Year. Recheck the electric properties of lamp when it is over the validity.
Related Keywords
Related Keywords
