New Design Huge Vapor 3.5ml/ 6/0ml DCT Atomizer
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Product Description
Product Description
Basic Specification
| Model NO. | DCT Atomizer |
|---|---|
| Atomizer Capicity | 3.5ml/6ml |
| Clour | Multicolour |
| Size | 49.5*17.5mm(6.0ml); 56.0*14.0mm(3.5ml) |
| Export Markets | Global |
| Charge Mode | Battery, Direct Charge, USB |
| Life | 300 - 600 Puffs |
| Colour | Multicolour |
| Battery Capacity | 100mAh -300mAh |
Detail Description
New Design Huge Vapor 3.5ml/ 6/0ml DCT Atomizer
Feature
Fits all our 510 and EGO products
Holds 6/3.5ml (Over 4x as much as the normal size atomizers) of juice and has Dual Atomizer Coils to produce mega vapor and flavor. This is a must have for serious vapors!
These are available in low resistance 1.5ohm and regular resistance 2.5ohm. Complete Tube Tank kits with dual coil atomizers to produce maximum flavor and vapor from your 510 and EGO Electronic Cigarette e-Cig.
2.5ohm is for use with higher voltage devices.
Content of per DCT Atomizer:
1 - Tube Assembly
1 - Dual Coil Atomizer insert
1 - 9.2mm Drip tip
How to refill the DCT aromizer
1. You will need the empty tube tank assembly and a bottle of liquid
2. Remove the drip tip from the internal atomizer
3. Fill the internal atomizer by dripping 10-15 drops of liquid around the edges into the fabric filler. Be careful not to get liquid into the center hole.
4. Slide the internal atomizer partially out of the tube
5. Drip liquid into the tube around the internal atomizer. As it fills you can slide the atomizer up to prevent liquid from going into the internal atomizer. Fill as close to the top as you can get without allowing the liquid to leak into the internal atomizer.
6. Slide the internal atomizer back into the top sleeve of the tube tank and align the bottom (thread end) with the slot on the end of the tube tank so it\'s fully inserted into bottom of the tube tank.
7. Replace the drip tip. You\'ll need to apply pressure to the bottom of the internal atomizer while pushing the drip tip on to prevent the internal atomizer from sliding out of the tube tank.
8. Screw onto your device and you\'re ready to use the tank tube assembly.
Our service:
(1). Your inquiry related to our products or prices will be replied in 24 hours.
(2). Experienced staffs to answer all your inquires in fluent English.
(3). We are doing the OEM and ODM service for more than 3 years.
(4). Protection of your sales area, ideas of design and all your private information.
(5). No matter big order or small order, we will provide all the best quality, best service.
(6). Our products have half year warranty.
(7). If our products have any problem, we will send free in the next order if it is our mistake.
Welcome to inquiry, welcome to ask any question, welcome to visit our factory
Shipment & Delivery time & Payment:
Shipment: EMS, DHL, UPS, TNT, air transportation, etc. According to customer\'s requirements.
Delivery time: 2~3 days for sample order; 3~7 days for bulk order; <15 days for OEM order.
Payment: PayPal, T/T, West Union.
Feature
Fits all our 510 and EGO products
Holds 6/3.5ml (Over 4x as much as the normal size atomizers) of juice and has Dual Atomizer Coils to produce mega vapor and flavor. This is a must have for serious vapors!
These are available in low resistance 1.5ohm and regular resistance 2.5ohm. Complete Tube Tank kits with dual coil atomizers to produce maximum flavor and vapor from your 510 and EGO Electronic Cigarette e-Cig.
2.5ohm is for use with higher voltage devices.
Content of per DCT Atomizer:
1 - Tube Assembly
1 - Dual Coil Atomizer insert
1 - 9.2mm Drip tip
How to refill the DCT aromizer
1. You will need the empty tube tank assembly and a bottle of liquid
2. Remove the drip tip from the internal atomizer
3. Fill the internal atomizer by dripping 10-15 drops of liquid around the edges into the fabric filler. Be careful not to get liquid into the center hole.
4. Slide the internal atomizer partially out of the tube
5. Drip liquid into the tube around the internal atomizer. As it fills you can slide the atomizer up to prevent liquid from going into the internal atomizer. Fill as close to the top as you can get without allowing the liquid to leak into the internal atomizer.
6. Slide the internal atomizer back into the top sleeve of the tube tank and align the bottom (thread end) with the slot on the end of the tube tank so it\'s fully inserted into bottom of the tube tank.
7. Replace the drip tip. You\'ll need to apply pressure to the bottom of the internal atomizer while pushing the drip tip on to prevent the internal atomizer from sliding out of the tube tank.
8. Screw onto your device and you\'re ready to use the tank tube assembly.
Our service:
(1). Your inquiry related to our products or prices will be replied in 24 hours.
(2). Experienced staffs to answer all your inquires in fluent English.
(3). We are doing the OEM and ODM service for more than 3 years.
(4). Protection of your sales area, ideas of design and all your private information.
(5). No matter big order or small order, we will provide all the best quality, best service.
(6). Our products have half year warranty.
(7). If our products have any problem, we will send free in the next order if it is our mistake.
Welcome to inquiry, welcome to ask any question, welcome to visit our factory
Shipment & Delivery time & Payment:
Shipment: EMS, DHL, UPS, TNT, air transportation, etc. According to customer\'s requirements.
Delivery time: 2~3 days for sample order; 3~7 days for bulk order; <15 days for OEM order.
Payment: PayPal, T/T, West Union.
Additional Information
| Payment Terms | L/C, T/T, Credit Card, Western Union, Paypal |
|---|---|
| Minimum Order | 50 |
| Lead Time / Delivery Time | 15 Day(s) |
| Sample Available | YES |
| Delivery Details | 1,Sample within 5-7days.2,OEM 7-15days after receiving your sample confirmation.3,Delivery time is about 7 working days after receipt of your payment. |
| FOB Port | Guangzhou,Hong Kong,Shenzhen |
| Loading Info | We can use DHL, EMS, TNT, FedEx, UPS and several ways deliver the products to your hand . |
| Packing Info | 1,Products are shipped with via EMS, DHL, UPS, FedEx, TNT. 2,In order to ensure you receive your order tax free upon import, we declare lower value3.We use 49.5*26*40.5 Box put your products in. |
| Target Market(s) | Africa(except Middle East), Central & Southern Asia, Eastern Europe, Hong Kong/ Macao/ Taiwan, Japan & Korea, Latin America, Mainland China, Middle East, North America, Northern Europe, Oceania, Southeast Asia, Western & Southern Europe |
Related Keywords
Related Keywords
Related Products
Product Categories