LED Tube with TUV / ETL / SGS / CE / RoHS Certificates

Basic Specification

Warranty time	3years
FLUX	1100lumen
Package	25pcs/carton ，962323cm
LUX at 1 meter	440lux

Detail Description

LED tube with TUV / ETL / SGS / CE / RoHS Approval
Isolated driver DC36~DC40V safety working voltage with 18mA lower current
High lighting efficiency more than 100lumen/watts
Caps rotatable: +-90 degree
50,000+ hours, Beam angle: 120°, 75% brightness at 30000hrs
Dimmable function, emergency function, motion sensor function
Voltage: AC65-285v or DC12-24v

SA is an upgraded version CFL tube replacement with LED. It has the best configuration of brightness and power efficiency.which can last 80000hrs
SA is designed to replace medium bi-pin T8 and T10 fluorescent tubes. SA is directly into most fluorescent flxtures providing a simple upgrade to high quality LED lighting. SA is optimized to provide light outputs comparable to fluorescent and delivers the immediate beneflts of white-LED lighting; long lifetimes, no maintenance, high efflciency, no mercury, no recycling, no flickering, no buzzing, instant start, cold temperature operation, and high quality light. It provides energy savings of up to 75% over fluorescent applications that require long hours with low occupancy rates such as stairwells, corridors, warehouses, and remote locations. The high quality SA replacement tube is constructed from extruded aluminum to provide a virtually unbreakable, vandal proof lighting solution.
Why our SA?
-Much Longer life than CFL tube: min.15 years(suppose that light is on 8 hours per day)
-70%~80% Energy-saving over Fluorescent tubes
-Solid State, high shock/vibration resistant
-Work without ballast
-No RF interference
-No flickering or buzzing
-Quick and easy installation to minimize retrofit costs
-Instant soft-start
-Minimum maintenance costs
-Produce little Heat
-No Mercury and other hazardous materials, fully RoHS-compliant
-Continuous operation for white LEDs (15 years for other colors)
-Rated to operate from -40°F to 122°F [-40°C to 50°C], perfect for environments with extreme climates
Technical specifications
1 Standard length 60cm, 90cm,120cm and 150cm
2 Wide voltage input 85-265 VAC, 277V AC,DC24V
3 PF(power factor) >0.95
4 Power efficiency 〉95%
5 CT(color temperature) range
Warm white :2700-3200K ,Daylight white :3800k-4300k
Pure white: 5500-6500K

SA has 3 types according to its front shells. ?
Wave wavy patterns of the light
Frosted vivid light effect exactly same as CFL
Clear LED components can be seen from the front (brightest light output)

type	Model number	color	length	Power (W)	Light output(lm)
Wave shell	SA218	white	60cm	9	880
SA218	warm white	850
SA318	White	90cm	12	1150
SA318	Warm white	90cm	12	1100
SA418	white	120cm	18	1720
SA418	warm white	1655
SA518	white	150cm	24	2300
SA518	warm white	2215
Frosted shell	SA218	white	60cm	9	750
SA218	warm white	60cm	9	730
SA318	White	90cm	12	950
SA318	Warm white	90cm	12	900
SA418	white	120cm	18	1520
SA418	warm white	120cm	18	1480
SA518	white	150cm	24	2000
SA518	warm white	150cm	24	1955
Clear shell	SA218	white	60cm	9	920
SA218	warm white	60cm	9	890
SA318	White	90cm	12	1200
SA318	Warm white	90cm	12	1150
SA418	white	120cm	18	1820
SA418	warm white	120cm	18	1729
SA518	white	150cm	24	2350
SA518	warm white	150cm	24	2300
	L=0.6M	L=1.2M	L=1.5M
	1M	2M	3M	1M	2M	3M	1M	2M	3M
Wave shell	D 342 Lux	D 82 Lux	D 43 Lux	D 586 Lux	D 189 Lux	D 100 Lux	D 734 Lux	D 238 Lux	D 117 Lux
W 304 Lux	W 101 Lux	W 51 Lux	W 598 Lux	W 184 Lux	W 95 Lux	W 736 Lux	W 245 Lux	W 124 Lux
Frosted shell	D 265 Lux	D 75 Lux	D 35 Lux	D 459 Lux	D 149 Lux	D 76 Lux	D 552 Lux	D 184 Lux	D 92 Lux
W 264 Lux	W 69 Lux	W 34 Lux	W 459 Lux	W 359 Lux	W 70 Lux	W 506 Lux	W 176 Lux	W 95 Lux
Clear shell	D 321 Lux	D 104 Lux	D 53 Lux	D 570 Lux	D 195 Lux	D 101 Lux	D 765 Lux	D 247 Lux	D 135 Lux
W 302 Lux	W 104 Lux	W 48 Lux	W 550 Lux	W 185 Lux	W 95 Lux	W 745 Lux	W 240 Lux	W 128 Lux

Disclaimer to above matrix: the data of the light output is only from AMB Opto test reports. It may differentiate another result or source if tubes are tested through other equipments or test methods.
Usage notes
6 Standard warranty period 3 years
7 Only accredited electrical staff can disassemble and assemble SA. Protective measures should be taken while installation.
8 Electronic ballast and starter MUST be taken away from the existing fixture of CFL before installing SA
9 SA is of indoor design. Never install tubes in humid environments.
Packing method

Each tube is packed separately in a plastic pipe. Anti-static sponge end caps are used to protected the metal pins.
Shenzhen AMB Optoelectronics Technology Co., Ltd Warranty
AMB warrants this product (“Product”) against defects in material or workmanship for a period of three years from the date of purchase. If this Product is determined to be defective, AMB will repair or replace the Product, at its option. This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of, or to any part of the Product. This warranty does not cover damage due to improper operation or maintenance, connection to improper voltage supply, or attempted repair by anyone than a facility authorized by AMB to service the Product.

Repair or replacement as provided under this warranty is the exclusive remedy of the customer. AMB shall not be liable for any incidental or consequential damages for breach of any express or implied warranty on this Product except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose on this Product is limited in duration to the duration of this limited warranty.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.? This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

Only AMB may change, amend or modify the terms of this Limited Warranty and any such change, amendment or modification shall be in writing and issued by AMB. To obtain warranty service and shipping information call +86 755 89341521 or e-mail info@szamb.com You must provide proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the Product is within the warranty period to obtain warranty service. Consumers have legal rights under applicable national legislation governing the sale of consumer goods. Such rights are not affected by the warranties provision outlined in this document.
The SA can be used in a wide variety of lighting applications.

*WARNING: Not for use in fully enclosed fixtures. Non submergible. Not water tight. Operate in fixtures that provide the free flow of air around the lamp heat sink. Please contact us for information regarding how to best ventilate enclosed fixtures.

Additional Information

Payment Terms	L/C, T/T, Others
Minimum Order	100PCS
Lead Time / Delivery Time	15 Day(s)
Sample Available	YES
FOB Port	Shenzhen
Loading Info	By Air ，by sea ，by DHL/UPS/TNT
Packing Info	50pcs/carton （128cm2323cm），18kg/kg
Target Market(s)	North America, Oceania, Southeast Asia, Eastern Europe, Africa(except Middle East), Latin America, Japan & Korea, Western & Southern Europe, Northern Europe, Central & Southern Asia, Middle East