Polyimide Heat Transfer Film, applied for medical diagnostic instruments

Get Latest Price

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Payment Type:	L/C, T/T, PayPal or Western Union

Product Description

Rated up to 392 degrees F (200 degrees C)

Etched foil design

0.010" maximum thickness

2.5, 5, or 10 watts/In2

115 and 28V voltage

Optional pressure- double side adhesive

Basic information:

Interior FEP binding stands 200 deg. C
Apply in vacuum environment
Stand against most of chemical material such as acid, impregnant, alkali (except NaOH)
Size can be very small
Thin and small curly semi-diameter
Temperature range: -50-200 degreees C, maximum temperature is 150 deg. C for the heater with paster
Materials: Kapton/FEP, polyimide membrane
Resistance precision: ±10%ak±0.5Ω (taking maximum)
Medium strength: 1,000VRMS
Minimum curve semi-diameter: 0.8mm

Technical data:

Insulation: UDC500V >=200MΩ
Dielectric strength: UAC>=2,000V
Operating temperature: <=232°C
Power density: <=1.1W/cm² or <=6.5W/cm² (with thermostat)
Thickness: <=0.2mm can bent at any angle
Weight: <=278g/m²
Design instruction:
Drawing for maximum installation size of the heater
Relevant electric parameters: as power, voltage, resistance, current and tolerance
Direction, length and location of the lead wire

Applications:

Why Kapton:

Heating for very small sizes
Very thin
High dielectric strength
Flexible circuit design
Superior tensile strength and tear resistance
Resistant to radiation and most solvents
Better choice far high watt density heaters (those over 5W/in2), also used for watt densities of 5 or less
Excellent choice for heaters that require multi-zone wattages or heaters that have many holes and/or cutouts
May provide an economic advantage for high volume applications

Interior FEP binding stands 200 deg. C

Apply in vacuum environment

Stand against most of chemical material such as acid, impregnant, alkali (except NaOH)

Size can be very small

Thin and small curly semi-diameter

Temperature range: -50-200 degreees C, maximum temperature is 150 deg. C for the heater with paster

Materials: Kapton/FEP, polyimide membrane

Resistance precision: ±10%ak±0.5Ω (taking maximum)

Medium strength: 1,000VRMS

Minimum curve semi-diameter: 0.8mm

Insulation: UDC500V >=200MΩ

Dielectric strength: UAC>=2,000V