Shenzhen Green Works Lighting Co. Ltd
Shenzhen Green Works Lighting Co. Ltd
TUV SAA Approved 1,500mm 24W 5ft T8 LED Tube Lights, CRI 80Ra 100-110lm/w
  • TUV SAA Approved 1,500mm 24W 5ft T8 LED Tube Lights, CRI 80Ra 100-110lm/w
  • TUV SAA Approved 1,500mm 24W 5ft T8 LED Tube Lights, CRI 80Ra 100-110lm/w
  • TUV SAA Approved 1,500mm 24W 5ft T8 LED Tube Lights, CRI 80Ra 100-110lm/w
TUV SAA Approved 1,500mm 24W 5ft T8 LED Tube Lights, CRI 80Ra 100-110lm/w
TUV SAA Approved 1,500mm 24W 5ft T8 LED Tube Lights, CRI 80Ra 100-110lm/w
TUV SAA Approved 1,500mm 24W 5ft T8 LED Tube Lights, CRI 80Ra 100-110lm/w

TUV SAA Approved 1,500mm 24W 5ft T8 LED Tube Lights, CRI 80Ra 100-110lm/w

Payment Type:
Telegraphic Transfer (TT, T/T)
Quantity:

Your message must be between 20 to 2000 characters

Contact Now
Basic Info
Basic Info
Payment Type: Telegraphic Transfer (TT,T/T)
Product Description
Product Description
  • Description:
    • LED fluorescent tube as replacement of traditional fluorescent tube, energy saving  reach to more than 80%
    • Compliant to the requirement of green environment, energy-saving, as well as the long lifespan requirement of Worldwide, about 5,000 hours
    • LED fluorescent tube will be the future illuminating lighting instead of the traditional fluorescent tubes
    • Elliptical tube, 100-220V AC input, constant currency Isolated driver
  • Specifications:
    • Stable caps and rotatable caps optional
    • Isolating circuit design
    • Input voltages: AC 100-240V
    • Length: 1,500mm(5ft)
    • LED lighting source: Epistar SMD 2835 LEDs
    • Power: 24W
    • Luminous flux range: 2,200-2,500LM
    • CRI: 80Ra, 90 Ra optional
    • Lifespan: 50,000 to 80,000 hours
    • Certificates: TUV, SAA and C-tick
    • Aluminum heat-sink body ensures long lifespan
    • Matte cover or line-shaped cover, no glare
    • Take the LED tubes out from package carefully
    • Check if the LED tubes are excellent without damage, do not try to use any damaged products
    • Read the label parameter carefully before installation and make sure the voltage and current are correct
    • Indoor use only
    • Do not vibrate tube
    • Do not disassemble the tube if have no authorization
    • Do not store tubes in humidity environment
    • Firstly please turn-off the power before install the LED tube
    • Take down the tradition fluorescent tube, cut-off or directly take off the starter and ballast from the tradition fluorescent tube fixture
    • Then, according below wiring diagram to connect the LED tube on the tradition fixture
    • Make sure everything are correctly and then turn on the power, the LED tube will light 
    • Offices, supermarkets, schools, hospitals, lobby, halls, square, parking and more
    • Packing:
      • Each LED tube packed in solo cardboard tube, Then packed by paper carton
    • Quantity: 25 pieces/one carton
    • Size: 165x25x25cm
    • Gross weight: 14kg
  • LED fluorescent tube as replacement of traditional fluorescent tube, energy saving  reach to more than 80%
  • Compliant to the requirement of green environment, energy-saving, as well as the long lifespan requirement of Worldwide, about 5,000 hours
  • LED fluorescent tube will be the future illuminating lighting instead of the traditional fluorescent tubes
  • Elliptical tube, 100-220V AC input, constant currency Isolated driver
  • Stable caps and rotatable caps optional
  • Isolating circuit design
  • Input voltages: AC 100-240V
  • Length: 1,500mm(5ft)
  • LED lighting source: Epistar SMD 2835 LEDs
  • Power: 24W
  • Luminous flux range: 2,200-2,500LM
  • CRI: 80Ra, 90 Ra optional
  • Lifespan: 50,000 to 80,000 hours
  • Certificates: TUV, SAA and C-tick
  • Aluminum heat-sink body ensures long lifespan
  • Matte cover or line-shaped cover, no glare
  • Take the LED tubes out from package carefully
  • Check if the LED tubes are excellent without damage, do not try to use any damaged products
  • Read the label parameter carefully before installation and make sure the voltage and current are correct
  • Indoor use only
  • Do not vibrate tube
  • Do not disassemble the tube if have no authorization
  • Do not store tubes in humidity environment
  • Firstly please turn-off the power before install the LED tube
  • Take down the tradition fluorescent tube, cut-off or directly take off the starter and ballast from the tradition fluorescent tube fixture
  • Then, according below wiring diagram to connect the LED tube on the tradition fixture
  • Make sure everything are correctly and then turn on the power, the LED tube will light 
  • Offices, supermarkets, schools, hospitals, lobby, halls, square, parking and more
  • Packing:
    • Each LED tube packed in solo cardboard tube, Then packed by paper carton
  • Quantity: 25 pieces/one carton
  • Size: 165x25x25cm
  • Gross weight: 14kg
  • Each LED tube packed in solo cardboard tube, Then packed by paper carton
  • Send your message to this supplier

    • Mr.  James

    • Enter between 20 to 4,000 characters.

    Related Keywords

    Related Keywords