Shenzhen Pilot Guards Safety Technology Co. Ltd
Shenzhen Pilot Guards Safety Technology Co. Ltd
Wireless Smoke Detector, 9V DC and Low-power Alarm, Over 85dB Alarm Volume, With CE and RoHS Marks
  • Wireless Smoke Detector, 9V DC and Low-power Alarm, Over 85dB Alarm Volume, With CE and RoHS Marks
Wireless Smoke Detector, 9V DC and Low-power Alarm, Over 85dB Alarm Volume, With CE and RoHS Marks

Wireless Smoke Detector, 9V DC and Low-power Alarm, Over 85dB Alarm Volume, With CE and RoHS Marks

Payment Type:
Telegraphic Transfer (TT, T/T)
Quantity:

Your message must be between 20 to 2000 characters

Contact Now
Basic Info
Basic Info
Payment Type: Telegraphic Transfer (TT,T/T)
Product Description
Product Description
  • Features:
    • MCU technology
    • Apply optical smoke test room
    • Insect-resistant design
    • LED light display
    • Using ABS material
    • CE: TCT130325016W
    • RoHS: TCT130325016R-5
  • Technical parameters:
    • Power: 6F22 9V DC battery
    • Static current: d10uA
    • Alarm current: d12mA
    • Working temperatures: -10-50°C
    • Humidity: d95% RH
    • Alarm mode: sound and flash
    • Wireless frequency: 315/433MHz
    • Size (Ø x H): 107 x 44mm
  • Functions:
    • Photoelectric technology is generally more steady thanionization technology at detecting large particles, which tend tobe produced in greater quantity by smoldering fire, which maysmolder for hours before bursting into flame
    • Sources of these fires may include cigarettes
    • The unit monitors, air and when smoke reaches its sensingchamber, it alarms
    • It can give you more time to escape before fire spreads
    • This unit can only give an early warning of developing fires ifit is installed, maintained and located where smoke can reach itand where all residents can hear it, as described in thismanual
    • This unit will not sense gas, heat or flame
    • It cannot prevent or extinguish fires
    • The alarm shall include a test button that will electronicallysimulate the presence of smoke and cause the unit to go intoalarm
    • This sequence tests the units electronics, battery and horn toensure proper operating
    • The unit shall include a piezoelectric horn that is rated at 85decibels at 10ft
    • In a smoke incident, the horn will sound in the repetitivemanner, three beeps, a pause, three beeps, a pause
    • The unit shall also include a low-battery warning utilizing abrief alarm chirp every 30 to 40 seconds for a minimum of sevendays
    • The alarm will utilize a red LED that shall flash once every 30to 40 seconds to indicate the alarm is receiving power
  • Packaging details:
    • Packaging with white box
    • Carton size: 52 x 36 x 36cm, 100 pieces/carton
    • Gross weight: 18kg
    • Net weight: 16kg
  • MCU technology
  • Apply optical smoke test room
  • Insect-resistant design
  • LED light display
  • Using ABS material
  • CE: TCT130325016W
  • RoHS: TCT130325016R-5
  • Power: 6F22 9V DC battery
  • Static current: d10uA
  • Alarm current: d12mA
  • Working temperatures: -10-50°C
  • Humidity: d95% RH
  • Alarm mode: sound and flash
  • Wireless frequency: 315/433MHz
  • Size (Ø x H): 107 x 44mm
  • Photoelectric technology is generally more steady thanionization technology at detecting large particles, which tend tobe produced in greater quantity by smoldering fire, which maysmolder for hours before bursting into flame
  • Sources of these fires may include cigarettes
  • The unit monitors, air and when smoke reaches its sensingchamber, it alarms
  • It can give you more time to escape before fire spreads
  • This unit can only give an early warning of developing fires ifit is installed, maintained and located where smoke can reach itand where all residents can hear it, as described in thismanual
  • This unit will not sense gas, heat or flame
  • It cannot prevent or extinguish fires
  • The alarm shall include a test button that will electronicallysimulate the presence of smoke and cause the unit to go intoalarm
  • This sequence tests the units electronics, battery and horn toensure proper operating
  • The unit shall include a piezoelectric horn that is rated at 85decibels at 10ft
  • In a smoke incident, the horn will sound in the repetitivemanner, three beeps, a pause, three beeps, a pause
  • The unit shall also include a low-battery warning utilizing abrief alarm chirp every 30 to 40 seconds for a minimum of sevendays
  • The alarm will utilize a red LED that shall flash once every 30to 40 seconds to indicate the alarm is receiving power
  • Packaging with white box
  • Carton size: 52 x 36 x 36cm, 100 pieces/carton
  • Gross weight: 18kg
  • Net weight: 16kg
  • Send your message to this supplier

    • Mr.  Arno Supevisor

    • Enter between 20 to 4,000 characters.

    Related Keywords

    Related Keywords