Wireless smoke detector/sensor, 9V DC and low-power alarm, RoHS mark

Get Latest Price

Payment Type:: T/T, L/C

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Payment Type:	T/T, L/C

Product Description

Features:

MCU technology
Apply optical smoke test room
Insect-resistant design
LED light display
Using ABS material
CE: TCT 130325016W
RoHS: TCT 130325016R-5

Technical parameters:

Power: 6F22 9V DC battery
Static current: d10uA
Alarm current: d12mA
Working temperatures: -10 - 50°C
Humidity: d95% RH
Alarm mode: sound and flash
Wireless frequency: 315/433MHz
Size (¦ x H): 107 x 44mm

Functions:

Photoelectric technology is generally more steady thanionization technology at detecting large particles, which tend tobe produced in greater quantity by smoldering fire, which maysmolder for hours before bursting into flame
Sources of these fires may include cigarettes
The unit monitors the air and when smoke reaches its sensingchamber, it alarms
It can give you more time to escape before fire spreads
This unit can only give an early warning of developing fires ifit is installed, maintained and located where smoke can reach itand where all residents can hear it
This unit will not sense gas, heat or flame
It cannot prevent or extinguish fires
The alarm shall include a test button that will electronicallysimulate the presence of smoke and cause the unit to go intoalarm
This sequence tests the units electronics, battery and horn toensure proper operating
The unit shall include a piezoelectric horn that is rated at 85decibels at 10ft
In a smoke incident, the horn will sound in the repetitivemanner, three beeps, a pause, three beeps, a pause
The unit shall also include a low-battery warning utilizing abrief alarm chirp every 30 to 40 seconds for a minimum of sevendays
The alarm will utilize a red LED that shall flash once every 30to 40 seconds to indicate the alarm is receivingpower

Packaging details:

Packaging with white box
Carton size: 52 x 36 x 36cm
100 pieces/carton
Net weight: 16kg
Gross weight: 18kg

MCU technology

Apply optical smoke test room

Insect-resistant design

LED light display

Using ABS material

CE: TCT 130325016W

RoHS: TCT 130325016R-5

Power: 6F22 9V DC battery

Static current: d10uA

Alarm current: d12mA

Working temperatures: -10 - 50°C

Humidity: d95% RH

Alarm mode: sound and flash

Wireless frequency: 315/433MHz

Size (¦ x H): 107 x 44mm

Photoelectric technology is generally more steady thanionization technology at detecting large particles, which tend tobe produced in greater quantity by smoldering fire, which maysmolder for hours before bursting into flame

Sources of these fires may include cigarettes

The unit monitors the air and when smoke reaches its sensingchamber, it alarms

It can give you more time to escape before fire spreads

This unit can only give an early warning of developing fires ifit is installed, maintained and located where smoke can reach itand where all residents can hear it

This unit will not sense gas, heat or flame

It cannot prevent or extinguish fires

The alarm shall include a test button that will electronicallysimulate the presence of smoke and cause the unit to go intoalarm

This sequence tests the units electronics, battery and horn toensure proper operating

The unit shall include a piezoelectric horn that is rated at 85decibels at 10ft

In a smoke incident, the horn will sound in the repetitivemanner, three beeps, a pause, three beeps, a pause

The unit shall also include a low-battery warning utilizing abrief alarm chirp every 30 to 40 seconds for a minimum of sevendays

The alarm will utilize a red LED that shall flash once every 30to 40 seconds to indicate the alarm is receivingpower

Packaging with white box

Carton size: 52 x 36 x 36cm

100 pieces/carton

Net weight: 16kg

Gross weight: 18kg

Send your message to this supplier

* From:
* To:

Mr. Arno Supevisor
* Messages:

Enter between 20 to 4,000 characters.

Related Keywords