Wireless Fire Smoke Detector, 9V DC and Low-power Alarm, CE and RoHS Marks

Get Latest Price

Payment Type:: T/T, L/C, PayPal, Western Union or MoneyGram

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Payment Type:	T/T, L/C, PayPal, Western Union or MoneyGram

Product Description

Features:

MCU technology
Apply optical smoke test room
Insect-resistant design
LED light display
Using ABS material
CE: TCT 130325016W
RoHS: TCT 130325016R-5

Technical parameters:

Power supply: 6F22 9V DC battery
Static current: ≤10uA
Alarm current: ≤12mA
Working temperature: -10 - 50°C
Humidity: ≤95% RH
RHA l arm modes: sound and flash
Wireless frequency: 315/433MHz
Size: Φ107 x 44mm

Functions:

Photoelectric technology is generally more steady than ionization technology at detecting large particles, which tend to be produced in greater quantity by smoldering fire, which may smolder for hours before bursting into flame
Sources of these fires may include cigarettes
The unit monitors the air and when smoke reaches its sensing chamber, it alarms
It can give you more time to escape before fire spreads
This unit can only give an early warning of developing fires if it is installed, maintained and located where smoke can reach it and where all residents can hear it
This unit will not sense gas, heat or flame
It cannot prevent or extinguish fires
The alarm shall include a test button that will electronically simulate the presence of smoke and cause the unit to go into alarm
This sequence tests the units electronics, battery and horn to ensure proper operating
The unit shall include a piezoelectric horn that is rated at 85 decibels at 10ftIn a smoke incident, the horn will sound in the repetitive manner, three beeps, a pause, three beeps, a pause
The unit shall also include a low-battery warning utilizing a brief alarm chirp every 30 to 40 seconds for a minimum of seven days
The alarm will utilize a red LED that shall flash once every 30 to 40 seconds to indicate the alarm is receiving power

Packaging details:

Packaging with white box
Carton size: 52 x 36 x 36cm
100 pieces/carton
Net weight: 16kg
Gross weight: 18kg

MCU technology

Apply optical smoke test room

Insect-resistant design

LED light display

Using ABS material

CE: TCT 130325016W

RoHS: TCT 130325016R-5

Power supply: 6F22 9V DC battery

Static current: ≤10uA

Alarm current: ≤12mA

Working temperature: -10 - 50°C

Humidity: ≤95% RH

RHA l arm modes: sound and flash

Wireless frequency: 315/433MHz

Size: Φ107 x 44mm

Photoelectric technology is generally more steady than ionization technology at detecting large particles, which tend to be produced in greater quantity by smoldering fire, which may smolder for hours before bursting into flame

Sources of these fires may include cigarettes

The unit monitors the air and when smoke reaches its sensing chamber, it alarms

It can give you more time to escape before fire spreads

This unit can only give an early warning of developing fires if it is installed, maintained and located where smoke can reach it and where all residents can hear it

This unit will not sense gas, heat or flame

It cannot prevent or extinguish fires

The alarm shall include a test button that will electronically simulate the presence of smoke and cause the unit to go into alarm

This sequence tests the units electronics, battery and horn to ensure proper operating

The unit shall include a piezoelectric horn that is rated at 85 decibels at 10ftIn a smoke incident, the horn will sound in the repetitive manner, three beeps, a pause, three beeps, a pause

The unit shall also include a low-battery warning utilizing a brief alarm chirp every 30 to 40 seconds for a minimum of seven days

The alarm will utilize a red LED that shall flash once every 30 to 40 seconds to indicate the alarm is receiving power

Packaging with white box

Carton size: 52 x 36 x 36cm

100 pieces/carton

Net weight: 16kg

Gross weight: 18kg

Send your message to this supplier