
battery for electronic cigarette, eGo Threaded, HGB Battery Cell
- Payment Type:
- T/T, PayPal or Western Union
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Payment Type: | T/T, PayPal or Western Union |
---|
Product Description
Product Description
- Power-on reset: the LED light (red, blue, white) will blink 3 times, after that the PCBA access to power-saving mode
- LED voltage indications:
- The LED light will change according to different voltage, when the battery voltage is less than 3.5V (0-2%), the LED light turns red
- When the battery voltage is between 3.5 - 3.8V (2-50%), the LED light turns blue, when the battery voltage is between 3.8-4.2V (50-100%), the LED light turns white
- When inhaling, different LED light up while different voltage
- When the button was pressed for more than 8 seconds, the atomizer stops working, LED light will blink 8 times, you can continue smoking after the blink
- Battery voltage detection, low-voltage protections:
- If the red LED light-on your button flashes ten seconds, this mean that the voltage is lower than 3.2V after inhaling, and the battery need to be charged
- During this time, the battery won’t work even you press the button until it was activated after charging
- Lock/unlock: press the button 5 times (each time the LED light will light up, different LED light during different battery voltage light up) within 2 seconds, the LED (red, blue, white at the same time) flashes 3 times to lock/unlock the battery
- Battery capacity: 650/ 900/1,100mAh
- Battery support: 800/1,000/1,200 puffs
- Charging time: 2 -3 hours
- Battery lifetime: more than 300 cycles
- Short-circuit protections:
- When a short on the output load (heating coil) is detected, the battery will shutdown until the short is removed, the LED will blinks 3 times
- The battery will not puff any vapors
- The LED light will change according to different voltage, when the battery voltage is less than 3.5V (0-2%), the LED light turns red
- When the battery voltage is between 3.5 - 3.8V (2-50%), the LED light turns blue, when the battery voltage is between 3.8-4.2V (50-100%), the LED light turns white
- When inhaling, different LED light up while different voltage
- If the red LED light-on your button flashes ten seconds, this mean that the voltage is lower than 3.2V after inhaling, and the battery need to be charged
- During this time, the battery won’t work even you press the button until it was activated after charging
- When a short on the output load (heating coil) is detected, the battery will shutdown until the short is removed, the LED will blinks 3 times
- The battery will not puff any vapors
Related Keywords
Related Keywords