Hospital Fetal Monitor-Multi Usage Jpd-600p (7 inch) CE Marked

Get Latest Price

Payment Type:: L/C, T/T, Paypal, Western Union

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Place of Origin:	Shenzhen China
Payment Type:	L/C, T/T, Paypal, Western Union

Product Description

Multi-Parameters fetal monitor JPD-600P(7 inch) CE marked
Bedside care, normal hospital monitor

Standard configuration: FHR, TOCO, FM SpO2, NIBP, PR

Feture:

1. Three in one transducers and avoid the cable intertwinsting, single probe also can offer, nine crystals probe, solid and durable, waterproof and with high sensitivity
2. Built-in fetus waking-up function
3.7 inch TFT color folding display, 90° Turnning angle
4. FHR, TOCO and FM can be displayed by mumber and curve, can changing-over by the user
5.12 hours data storage for review and printed
6. Wide voltage range (100-240V), suitable for different countries
7. Low power of ultrasound, harmless to fetus
8. Alarm function, mark for special and clinical patient, alarm upper and lower limit can be set by the user and the alarm method can optional
9. Adopt DSP technology, recognize and monitor the FHR in real time insure the result accurate and reliable
10. Built-in thermal printer, long using life, Print paper 112mm insure the printed curve clear, printing speed and density are adjustable
11. Information and RJ45 connector, can be connected in the hospital monitor center
12. Can work during charging, high anti-interference ability

GEL: Viscous aqueous non-sensitising, hypo-allergenic and non-irritating to skin. Indefinite shelf life, bacteriostatic (not sterile).

Technical Parameter:

Fetal Heart Rate:
Transducer: Multi-crystals, pulsed doppler , high sensitively
Strength: <5mW/cm2
Working frequency: 1.0MHz
Signal processing:  special DSP system and modern recognization.
Measurement range:  60 bpm ~210 bpm
Alarm Range:
High limit: 160 bpm,170 bpm,180 bpm,190 bpm
Low limit: 90 bpm,100 bpm,110 bpm,120 bpm
Maximum audio output power : 1.5 Watt
Toco:
Measurement range: 0 units ~100 units
Maternal SpO2 measure:
Measure scope : 70%~99%.
Measure accuracy: ±3%
Pregnant HR Measure:
Measure scope: 30bpm~240bpm
Measure accuracy: ±2 bpm
NIBP measure:
a)   NIBP-SYS  6.7Kpa~32.0Kpa (50mmHg~240mmHg)
b)  NIBP-DIA  3.4Kpa~26.6Kpa (25mmHg~200mmHg)
c)NIBP-MEAN 2.0Kpa~24.0kpa (15mmHg~180mmHg)
NIBP Accuracy: ±1.1kPa(±8mmHg)or ±5% of the results, take the bigger one.
Maximum Mean error : ±5mmHg
Maximum Standard deviation 8mmHg
Pulse Rate Accuracy: Maximum Mean error : ±2bpm
Measure accuracy: ±2 bpm or ±5% of the results, take the bigger one.
Measure mode: Manual
Display:
The LCD displays FHR, TOCO, FM , maternal parameters , time, date, volume and so on, It can store and play back the data.
Power: a.c.100v - 240v, 50/60Hz ,d.c.15v or 16.8v Li-ION battery
Power Consumption: < 20W
Dimension: 307mm (length) ×296mm (width) ×101mm (height)
Net weight: Three-parameter type: 2.75kg; nine-parameter type: 3kg. (Both does not contain accessories such as probe)
Environment
Working environment: Temperature: +5ºC ~ +40ºC
Humidity: < 85%
Atmospheric pressure: 86kPa ~ 106kPa
Transport and storage temperature: Temperature: -10ºC ~ +55ºC
Humidity: < 93%
Atmospheric pressure: 86kPa ~ 106kPa
Transducer Acoustic Output:
Under the requirements laid down in IEC 1157, 1992, the peak negative acoustic pressure
does not exceed 1Mpa. The output beam intensity does not exceed 20mW/cm2
and the spatial-peak temporal-average intensity does not exceed 100mW/cm2

Technical parameters
Ultrasound frequency			1MHz± 5%
Power supply			AC100~240V 50/60Hz
Working temperature (centidegree)			5~40
Working humidity			< 85%
Working atmospheric pressure (KPa)			86~106
Storage temperature (centidegree)			-10~+55
Storage relative humidity			< 93%
Storage atmospheric pressure			86~106
Machine0.2% Dimension (mm)
Net weight
FM			Button hand count automatic cumulative number of movement
ECG	Range		30~300bpm
	Accuracy		± 1bpm
	Choice		I, II. III, AVR, AVL, AVF, V
	Scan speed		12.5/25/50mm/s
	Gain choice		0.25, 0.5, 1, 2
	Application		Diagnosis, monitor, surgery
RESP	Range		1~99rpm
	Resolution		1rpm
	Accuracy		± 2rpm
TEMP	Range		26~45 centidegree
	Resolution		0.1centidegree
	Accuracy		± 0.2%
FHR		Ultrasound intensity	< 5mW/cm 2
		Measure range (bpm)	50~210
		Alarm range (bpm)	H: 160/170/180/190
			L: 90/100/110/120
		Maximum audio output power	1.5W
TOCO		Measure range	0~100 unit
		Resolution	1
		Non-linear error	≤ ± 5%
Maternal HR		Measure scope (bpm)	30~240
		Measure accuracy (bpm)	± 2
Maternal SPO2		Measure scope	70%~99%
		Resolution	1%
		Measure accuracy	± 2bpm
NIBP		Systolic pressure	50~240 mmHg
		Diastolic pressure	15~180 mmHg
		Mean pressure	25~200 mmHg
		NIBP accuracy	± 8mmHg
PR		PR range	40~240bpm
		Mode	Automanual
		Resolution	1 mmHg
		PR accuracy	± 2bpm

Faults	Probable causes	Approaches
No displaying after start	Power cord is not plugged well Power failure or poor power plug or socket	Inspect the power and power cord
When start the instrument, the LCD interface is normal but can't move the cursor.	Poor or broken connect between fetal monitoring module and motherboard	Connect again or replace the module
Fetal heart rate is abnormal	Poor connect of probe and connector The probe position is wrong and the probe does not find fetal heart. No coupling agent or the coupling agent is too little. Fetus/Pregnant women's movement The probe is broken.	Connect again Readjust the probe position Add coupling agent When there is signal again, readjust the probe position. Replace the probe.
Uterine contraction is abnormal	Poor connect of probe and instrument The probe position is wrong. The pressure has not been reset. Pregnant women have no uterine contraction	Connect again Readjust the probe position Reset the pressure Wait for uterine contraction
When press the pressure probe, there is no change or little change of the uterine contraction numerical value.	Drift of pressure probe internal circuit or the pressure probe is broken	Adjust the potentiometer in the side holes of pressure probe by straight screwdriver fixing watches to make the probe can read normal numerical value when pressing. Replace the pressure probe.
Press fetal movement pen, there is no display and printing icon.	Poor contact of scaler button switch	Inspected and determined by universal meter
The speaker is mute.	The volume is too low.	Turn up the volume.
The paper is running but no printing curve. Fetal heart curve is printed in uterine contraction area and uterine contraction curve is printed in fetal heart area.	The placement of thermal printing paper is adverse. The left and right sides of thermal surface are adverse.	Inspect whether thermal surface is upward and place paper again Take out the thermal paper and place again.
The printing is not clear or there can't print in partial area.	The printing denseness is set too light Poor printing paper has been used or the printing paper is subject to deterioration The printing thermal head is dirty.	Adjust printing denseness Replace printing paper Clean printing head in sequence.
The paper feed is deviated and there is error of the printing curve position.	The paper is not placed well The printing paper of different brands has been used	Adjust the direction and position of printing paper In the printing control menu, adjust the printing position according to indication

Send your message to this supplier

* From:
* To:

Ms. Wendy
* Messages:

Enter between 20 to 4,000 characters.

Related Keywords