Gpon Ontfor FTTX with 8fe+Poe Onaccess G600-08p

Overview
GPON ONU OnAccess G600-08P for MDU (Multi-Dwelling Unit) incorporates interoperability, key customers' specific requirements and cost-efficiency.
Equipped with ITU-T G. 984 compliant 2.5G Downstream and 1.25G Upstream GPON interface, the OnAccess G600-08P ONU supports the full Triple Play of services including voice, video (IPTV or VoD), and high speed internet access.
Compliant with standard OMCI definition, ONU OnAccess G600-08P is manageable at remote side and supports the full range FCAPS functions including supervision, monitoring, and maintenance.

Services
Data
The OnAccess G600-08P ONU is delivered with up to eight 10/100 Base-T Ethernet data interfaces, supporting:

Auto-negotiation and MDI/MDIX auto-sensing
Data transferring at wire-speed for all packet size
Built-in layer-2 switch
Advanced data features such as VLAN tag manipulation, classification, and filtering
Voice
To enable VoIP access, the OnAccess G600-08P ONT supports interfacing external IAD box or Home Router with voice capability through the Ethernet Interface.
Video
The OnAccess G600-08P ONU supports video contents delivered in the form of data (by multicast or unicast).
In case where multicast technology is used for delivering video contents through data channel, the ONT supports the dedicated multicast GEM port on the Downstream. So the video contents are received and processed by all the ONTs through the unified channel and this greatly improves the bandwidth efficiency.
In addition, the ONT supports IGMP snooping function to be applied for further optimization. When IGMP snooping is enabled, the ONT monitors the member joining and leaving activities at the Ethernet service port, and then selectively delivers the multicast streams.
PoE
OnAccess G600-08P ONU supports up to eight Power over Ethernet (PoE) interface as power supply equipment (PSE). Each PoE interface can provide up to 30W power output. In total, the whole MDU support up to 179 W power output.


Specifications

Dimensions

441mm x220mm x 44mm (W x D x H, without bracket)
483mm x220mm x 44mm (W x D x H, with bracket)
Power Supply

3-PIN AC Power Connector
Grounding Conductor
Dying Gasp support
Power switch
Power Consumption
With PoE: Less than 190W
Without PoE: Less than 11W
Working Environment

Temperature: -10º C ~ 55º C
Humidity: 5% ~ 95% relative humidity
Safety & EMI

CE certificate
FCC/UL compliant
Lightning Protection:
Instant surge 4 kV for power interface
Instant surge 1.5 kV for user interface
Environmental Directive

WEEE, RoHS6
Installation

Rack mounting & Wall mounting
GPON Interface

Compliant with ITU-T G. 984 GPON standards
SFF type laser, SC/APC connector
CIG patented BoSA on board optical solution
1.244 Gbps Burst Mode Upstream Transmitter
2.488 Gbps Downstream Receiver
Compliant with ITU-T G. 984.2 Amd1, Class B+
0.5dBm ~+5dBm launch power, -27dBm sensitivity, and -8dBm overload
Wavelengths:
US 1310nm, DS 1490nm
Laser compliant with FCC 47 CFR Part 15, Class B, and FDA 21 CFR 1040.10 and 1040.11, Class I, ONT support Class C or Class C+ optics as an option
Support G. 984.5 Blocking Filter as an option
Multiple T-CONTs per device
Multiple GEM Ports per device
Flexible mapping between GEM Ports and T-CONT
Activation with automatic discovered SN and password in conformance with ITU-T G. 984.3
AES-128 Decryption with key generation and switching
FEC (Forward Error Correction) in both directions
DBA reporting by piggyback reports in the DBRu (mode 0)
802.1p mapper service profile on U/S
Mapping of GEM Ports into a T-CONT with priority queues based scheduling
Support Multicast GEM port and incidental broadcast GEM port.