8fe with Poe (PSE) Gpon Ont Equipment

Dimensions

441mm x220mm x 44mm (W x D x H, without bracket)
483mm x220mm x 44mm (W x D x H, with bracket)
Power Supply

3-PIN AC Power Connector
Grounding Conductor
Dying Gasp support
Power switch
Power Consumption
With PoE: Less than 190W
Without PoE: Less than 11W
Working Environment

Temperature: -10º C ~ 55º C
Humidity: 5% ~ 95% relative humidity
Safety & EMI

CE certificate
FCC/UL compliant
Lightning Protection:
Instant surge 4 kV for power interface
Instant surge 1.5 kV for user interface
Environmental Directive

WEEE, RoHS6
Installation

Rack mounting & Wall mounting
GPON Interface

Compliant with ITU-T G. 984 GPON standards
SFF type laser, SC/APC connector
CIG patented BoSA on board optical solution
1.244 Gbps Burst Mode Upstream Transmitter
2.488 Gbps Downstream Receiver
Compliant with ITU-T G. 984.2 Amd1, Class B+
0.5dBm ~+5dBm launch power, -27dBm sensitivity, and -8dBm overload
Wavelengths:
US 1310nm, DS 1490nm
Laser compliant with FCC 47 CFR Part 15, Class B, and FDA 21 CFR 1040.10 and 1040.11, Class I, ONT support Class C or Class C+ optics as an option
Support G. 984.5 Blocking Filter as an option
Multiple T-CONTs per device
Multiple GEM Ports per device
Flexible mapping between GEM Ports and T-CONT
Activation with automatic discovered SN and password in conformance with ITU-T G. 984.3
AES-128 Decryption with key generation and switching
FEC (Forward Error Correction) in both directions
DBA reporting by piggyback reports in the DBRu (mode 0)
802.1p mapper service profile on U/S
Mapping of GEM Ports into a T-CONT with priority queues based scheduling
Support Multicast GEM port and incidental broadcast GEM port.
Ethernet Interface

10/100 Base-T interface with RJ-45 connectors
Ethernet port auto negotiation or manual configuration
MDI/MDIX automatically sense
Hardware priority queues on the downstream direction in support of CoS
802.1D bridging
Virtual switch based on 802.1q VLAN
VLAN tagging/de-tagging per Ethernet port
VLAN stacking (Q-in-Q) and VLAN Translation
IP ToS/DSCP to 802.1p mapping
Class of Service based on UNI, VLAN-ID, 802.1p bit, ToS/DSCP
Marking/remarking of 802.1p
IGMP v2/v3 snooping
Broadcast/Multicast rate limiting
Power Over Ethernet

Compliant to IEEE 802.3af and IEEE 802.3at
PoE Alternative B solution (PIN 4, 5, 7, 8 of RJ 45 for power transmission)
Support up to 30.0 W power output for each PoE interface
Total power output capability: 179W
Multiple power output profiles are supported:
Class 0/Class 3: 15.4 W
Class 1: 4.0 W
Class 2: 7.0 W
Class 4: 30.0 W
Manageable via OMCI
Management Interface

1 console interface
1 management interface
4 PIN ALARM input interface (support 3 alarms)
LEDs

LED for System
POWER
ALARM
NET
MGMT
LED for Ethernet (per port)

MODE
LINK
POE
OAM

Standard compliant OMCI (the embedded operations channel) interface as defined by ITU-T G. 988
Provisioning all kinds of services including Ethernet etc.
Alarming and performance monitoring
Remotely software image download over OMCI, as well as activation and rebooting
Hold two software sets with software image integrity checking and automatic rollback
Local access interface for debugging and maintenc