Shenzhen First Mile Communications Ltd.
Shenzhen First Mile Communications Ltd.
Triple Play 100Mbps Routed FTTH Gateway P2p ONU
  • Triple Play 100Mbps Routed FTTH Gateway P2p ONU
Triple Play 100Mbps Routed FTTH Gateway P2p ONU

Triple Play 100Mbps Routed FTTH Gateway P2p ONU

Payment Type:
L/C, T/T, Money Gram, Western Union
Quantity:

Your message must be between 20 to 2000 characters

Contact Now
Basic Info
Basic Info
Place of Origin: Shenzhen China
Payment Type: L/C, T/T, Money Gram, Western Union
Product Description
Product Description
OnAccess 44xR series advanced routed FTTH optical gateways are developed to enable managed Ethernet services on Layer 3. They provide the demarcation point of the network and offer all the functions of Layer 3 residential gateway, including routing, wireless connectivity, voice and CATV. It offers up to eight(8) data ports of 100 Mbps each.

Four Ethernet ports for user interfaces, which can operate in switched or routed mode
Two FXS ports to connect analog phones
RF CATV overlay, and support remote enabling/disabling and monitoring
Built-in WiFi (IEEE 802.11b/g/n)
Low power consumption solution
Flexible management and provisioning through Web, CLI, Telnet, SNMP, and TR-069
Centralized management through OnAccess View EMS
Fiber Termination Unit and Backup battery available

WAN port
SFP Based
100Base-BX-U(BIDI): TX 1310nm, RX1490 or 1550nm
100Base-LX(dual fiber): TX 1310nm, RX1310nm
SC/PC or LC/PC or SC/APC (for Triple-Play models, single fiber version)
Full duplex transmission
SFP internal ID and status monitoring capability
Support longer range based on clients' requirements
LAN ports
(In Switch Mode)
10/100Base-TX
RJ45 Connectors, Auto-negotiating speed, duplex, Auto-MDI/MDIX
Per port configurable to routing or bridging mode
Ports managed independently
4 priority QoS queues per port
Configurable 802.1p and DSCP, priority-to-queue mapping
VLAN tagging
LAN ports
(In Route Mode)
LAN-side management via web interface
Reset switch for factory default settings of LAN-side router settings
DHCP-server, NAT, IGMP (v2), UPnP
WAN-side of routed interface supports DHCP-client, PPPoE, L2TP, PPTP
IGMP Proxy
PPPoE passthrough
wireless LAN/WAN IEEE 802.11b/g/n
Provides 300Mbps transmission rate
Disabled / enabled / WPS active
2.400 ~ 2.483 GHz frequency band
Internal antennas
Supports 64/128-bit WEP, WPA, WPA2, WPA1WPA2, WPA-PSK, WPA2PSK, WPAPSKWPA2PSK and 802.1X encryption
WPS registration button
Supports Hidden SSID and Multiple SSID
Supports TxPower adjustment
Supports Wireless Client Access Control
Supports WDS Lazy Mode, Bridge Mode and Repeater Mode
Supports WMM (Wi-Fi Multimedia)
Supports AP Discovery
VoIP ports 2 RJ11 FXS POTS ports, 2 separate telephone lines
SIP-based Voice-over-IP
G.711 A-law, µ-law codec, G.726, G.723,G.729 codec, GSM codec
DTMF signaling in-band / RFC 2833 /SIP info
Line Echo Cancellation 
Adaptive jitter buffer
Packet Loss Concealment
Caller ID support (DTMF / FSK)
Class 5 services: call forward, call hold /release, call waiting, call forwarding and 3-way conference call
RF CATV Optical parameter SC/APC connector
Receive wavelength:  1260…1600nm
Optical input: -10dBm…+2dBm
Recommended input: -8dBm…0dBm
Electrical parameter Coaxial connector  F-female (IEC 16924)
RF impedance coaxial connector  75 Ω
RF frequency range  40 MHz– 870 MHz
Flatness  ± 1 dB
Return loss output  >=14 dB
C/N 47 dB @ -10 dBm input, OMI 5%/ch
CSO -65 dBc  (-5 dBm optical input)
CTB -65 dBc typical  (-5dBm optical input)
RF output level  80 – 90 dBµV  typical
(-10 dBm to +2 dBm, OMI 5%/ch)
Control and monitoring Remote enabling/disabling
Remote monitoring if input signal is valid 
Local monitoring if input signal is valid (LED indicator)
Orange Color:  -10dBm…-8dBm, 0dBm…+2dBm
Red Color: < -10dBm, > +2dBm
Management OnAccess View EMS
Web-based user interface (HTTP)
Firmware upgrade via TFTP
Three levels of user authorization (superuser, administrator and guest)
Support SNMP v1/v2c/v3
TR-069 support
Emission and Safety CE approved
Safety: IEC EN 60950
Laser Safety: IEC EN 60825-1, Class 1 laser product
Emission: EN 55022, ClassB
Immunity: EN 55024
Physical Parameter Dimensions(HxWxD): 
213mm X 268mmX56mm W/ cover;  183mm X 268mmX56mm W/O cover
Weight: 1.3kg
Power Supply: 12VDC
Power dissipation: <6W
Operating Temp.  0ºC~+60ºC      Storage Temp. -10ºC~+70ºC
Relative humidity  5%~95% (non-condensing)



Configuration Overview
Model WAN, Fiber, 100M LAN, 10/100Base-T WiFi CATV VoIP
OnAccess 441R S:  Single, SC/PC or LC/PC 4 Yes No No
D:  Dual, LC/PC
OnAccess 442R S:  Single, SC/APC 4 Yes Yes Yes
D:  Dual, SC/APC+ SC/PC or LC/PC
OnAccess 444R S:  Single, SC/APC 4 Yes Yes Yes
D:  Dual, SC/APC+ SC/PC or LC/PC
OnAccess 445R S:  Single, SC/PC or LC/PC 4 Yes No No
D:  Dual, LC/PC

Send your message to this supplier

  • Mr. Wangliquan

  • Enter between 20 to 4,000 characters.

Related Keywords

Related Keywords